Computer Server User Manual

4-19
BIOS Setup
Security
This section lets you set security passwords to control access to the system
at boot time and/or when entering the BIOS setup program. It also allows you to set
virus protection at hard disk boot sector.
Supervisor Password Is/User Password Is
It shows the preset supervisor/user password. (read only)
Set Supervisor Password/Set User Password
Enabling Supervisor Password requires a password for entering Setup. The pass-
words are not case sensitive. Pressing <Enter> at either Set Supervisor Password
or Set User Password displays the following message:
Type the password and press <Enter>. Repeat.
Set Supervisor Password
Enter New Password:
Confirm New Password:
[]
[]
Supervisor Password Is : Clear
User Password Is : Clear
Set Supervisor Password : [Enter]
Set User Password : [Enter]
Password on boot : [Disabled]
Fixed disk boot sector : [Normal]
PhoenixBIOS Setup Utility
Main System Summary Advanced IPMI Security Boot Exit
Item Specific Help
F1 Help ↑↓ Select Item -/+ Change Values F9 Setup Defaults
Esc Exit ↔ Select Menu Enter Select Sub-Menu F10 Save and Exit
8