User Manual

2-8
Hardware Setup ▍
MS-96D2
Hardware Setup ▍
MS-96D2
Important
In Dual-Channel mode, make sure that you install memory modules of the same
type and density in different channel DIMM slots.
Installing Memory Modules
Thememorymodulehasonlyonenotchonthecenterandwillonlytinthe
rightorientation.
InsertthememorymoduleverticallyintotheDIMMslot.Thenpushitinuntil
thegoldenngeronthememorymoduleisdeeplyinsertedintheDIMMslot.
TheplasticclipateachsideoftheDIMMslotwillautomaticallyclosewhen
thememorymoduleisproperlyseated.
ManuallycheckifthememorymodulehasbeenlockedinplacebytheDIMM
slotclipsatthesides.
Notch
Volt
Important
You can barely see the golden nger if the memory module is properly inserted
in the DIMM slot.
1.
2.
3.