User Manual

Hardware Setup ▍
MS-96D2
2-9
Hardware Setup ▍
MS-96D2
Important
Make sure that all the connectors are connected to proper ATX power supplies
to ensure stable operation of the mainboard.
Power supply of 450 watts (and above) is highly recommended for system
stability.
•
•
ATX 24-Pin Power Connector: JPWR1
This connector allows you to connect an ATX 24-pin power supply. To connect
the ATX 24-pin power supply, make sure the plug of the power supply is inserted
in the proper orientation and the pins are aligned. Then push down the power
supply rmly into the connector.
You may use the 20-pin ATX power supply as you like. If you’d like to use the
20-pin ATX power supply, please plug your power supply along with pin 1 & pin
13. There is also a foolproof design on pin 11, 12, 23 & 24 to avoid wrong instal-
lat
ion.
ATX 8-Pin Power Connector: JPWR2
This power connector is used to provide power to the CPU.
power SuppLy
1
8
5
4
1
12 24
13
PIN SIGNAL PIN SIGNAL
1
2
3
4
5
6
7
8
9
10
11
12
+3.3V
+3.3V
GND
+5V
GND
+5V
GND
PWR OK
5VSB
+12V
+12V
+3.3V
13
14
15
16
17
18
19
20
21
22
23
24
+3.3V
-12V
GND
PS-ON#
GND
GND
GND
Res
+5V
+5V
+5V
GND
PIN SIGNAL
1
2
3
4
5
6
7
8
GND
GND
GND
GND
+12V
+12V
+12V
+12V