User Manual

2-14
Hardware Setup ▍
MS-96D2
Hardware Setup ▍
MS-96D2
2
INTRUER_N
GND
1
Chassis Intrusion Connector: JCASE1
This connector connects to the chassis intrusion switch cable. If the chassis is
opened, the chassis intrusion mechanism will be activated. The system will re-
cord this status and show a warning message on the screen. To clear the warn-
ing, you must enter the BIOS utility and clear the record.
I2C Bus Connector: JSMBUS1
This connector, known as I2C, is for users to connect System Management Bus
(SMBus) interface.
5
1
IPMB Connector: JIPMB1
This connector is used to connect the IPMB (Intelligent Platform Management
Bus) SMBus.
1
3
PIN SIGNAL
1
2
3
SMB Data
GND
SMB Clock
PIN SIGNAL
1
2
3
4
5
SMB Clock
SMB Data
PS Alert
GND
+3.3V