User Manual

2-16

Hardware Setup

▍

MS-96D2

Hardware Setup

▍

MS-96D2

JuMper

Clear CMOS Jumper: J_CMOS1

There is a CMOS RAM onboard that has a power supply from an external battery

to keep the data of system conguration. With the CMOS RAM, the system can

automatically boot OS every time it is turned on. If you want to clear the system

conguration, set the jumper to clear data.

Important

You can clear CMOS by shorting 2-3 pin while the system is off. Then return to

1-2 pin position. Avoid clearing the CMOS while the system is on; it will damage

the mainboard.

VGA Control Jumper: J_VGA1

This jumper is used to enable or disable the VGA controller.

Clear DataKeep DataJ_CMOS1

Disable

Enable

J_VGA1

1 1

BIOS Recovery Jumper: J3

Users can short connect pin#2-3 to recover the system BIOS. When the system

is done with the job, the buzzer will beep to remind users to set the jumper to its

normal state (pin#1-2 short connected).

Normal

Recovery