Owner's Manual
B-20
LSI SAS RAID
▍
MS-96E0
LSI SAS RAID
▍
MS-96E0
Press Enter to go to the Adapter Properties screen, shown in Figure 5.1.
On the Adapter Properties screen, use the arrow keys to select RAID Properties
on the screen and press Enter.
When you are prompted to select a volume type, select Create IS Volume. The
Create New Array screen shows a list of disks that can be added to a volume.
Move the cursor to the “RAID Disk” column. To add a disk to the volume, change
the “No” to “Yes” by pressing the + key, . key, or space bar. As disks are added,
the Array Size eld changes to reect the size of the new volume.
2]
3]
4]
5]
There are several limitations when creating an IS (RAID 0) volume:
All disks must be either SATA (with extended command set support) or SAS
(with SMART support).
Disks must have 512-byte blocks and must not have removable media.
There must be at least 2 and no more than 8 drives in a valid IS volume. Hot
spare drives are not allowed.
■
■
■