Owner's Manual

2-4

Hardware Setup

▍

MS-96E0

Hardware Setup

▍

MS-96E0

CPU Installation

When you are installing the CPU, make sure the CPU has a cooler attached on the top

to prevent overheating. Meanwhile, do not forget to apply some thermal paste on CPU

before installing the heat sink/cooler fan for better heat dispersion.

Follow the steps below to install the CPU correctly. Wrong installation will cause the

damage of your CPU & mainboard.

Open the load lever.

Lift the load lever up and open the

load plate.

The CPU socket has a plastic cap

on it to protect the contact from

damage. Before you install CPU,

always cover it to protect the

socket pin. Remove the cap from

the lever hinge side.

3. After conrming the CPU direction

for correct mating, put down the

CPU in the socket housing frame.

Be sure to grasp on the edge of the

CPU base. Note that the alignment

keys are matched.

Alignment Key