Owner's Manual
2-16
Hardware Setup
▍
MS-96E0
Hardware Setup
▍
MS-96E0
JuMper
BIOS Recovery Jumper: RECOVERY
Users can short connect pin#2-3 to recover the system BIOS with a Recovery
Floppy. When the system is done with the job, the buzzer will beep to remind the
user to set the jumper to its normal state (pin#1-2 short connected).
BIOS Write Protect Jumper: JBIOS_WP
This jumper is used to enable/disable the BIOS ash. When you intend to update
the BIOS code, uncap this jumper rst. Under normal operation, we suggest that
you disable the BIOS ash by capping this jumper to protect the system BIOS
from virus infection.
Disable BIOS Flash
Enable BIOS Flash
JBIOS_WP
Normal (default)
1
BIOS recovery
1
RECOVERY
1