Owner's Manual
Hardware Setup
▍
MS-96E0
2-17
Hardware Setup
▍
MS-96E0
Clear CMOS Jumper: CLR_CMOS
There is a CMOS RAM onboard that has a power supply from an external battery
to keep the data of system conguration. With the CMOS RAM, the system can
automatically boot OS every time it is turned on. If you want to clear the system
conguration, set the jumper to clear data.
Important
You can clear CMOS by shorting 2-3 pin while the system is off. Then return to
1-2 pin position. Avoid clearing the CMOS while the system is on; it will damage
the mainboard.
Keep Data
1
Clear Data
1
CLR_CMOS
1
SAS ID Jumper: JSASID1
This jumper is provided to specify the SAS ID.
MEGA RAID ID IR RAID ID
JSASID1