Owner's Manual

BIOS Setup
MS-96E0
3-7
BIOS Setup
MS-96E0
C1E Support
When the C1E Support (Enhanced Halt Powerdown State) is enabled, the
processor will transition to a lower core to bus ratio and lower voltage ID
driven by the processor to the voltage regulator before entering Halt Pow
-
erdown State (C1). Not all porcessors support Enhanced Halt Powerdown
State (C1E).
Intel(R) HT Technology
The processor uses Hyper-Threading technology to increase transaction
rates and reduces end-user response times. The technology treats the two
cores inside the processor as two logical processors that can execute instruc
-
tions simultaneously. In this way, the system performance is highly improved.
If you disable the function, the processor will use only one core to execute the
instructions. Please disable this item if your operating system doesn’t support
HT Function, or unreliability and instability may occur.
Intel(R) SpeedStep(tm) Tech
EIST (Enhanced Intel SpeedStep Technology) allows the system to dynami
-
cally adjust processor voltage and core frequency, which can result in de-
creased average power consumption and decreased average heat produc-
tion.
IDE Conguration
SATA Conguration, SATA#2 Conguration
This setting species the SATA controller mode.
Congure SATA as
This setting species the operation mode of the installed SATA drive.