Owner's Manual

Intel ICH10R SATA RAID

▍

MS-96E0

A-5

Intel ICH10R SATA RAID

▍

MS-96E0

In the Disk eld, press <Enter> key and the following screen appears. Use <Space>

key to select the disks you want to create for the RAID volume, then click <Enter>

key to nish selection.

Then select the strip value for the RAID array by using the “upper arrow” or

“down arrow” keys to scroll through the available values, and pressing the

<Enter> key to select and advance to the next eld. The available values

range from 4KB to 128 KB in power of 2 increments. The strip value should

be chosen based on the planned drive usage. Here are some typical values:

RAID0 -128KB / RAID10 - 64KB / RAID5 - 64KB.

Then select the capacity of the volume in the Capacity eld. The default value is the

maximum volume capacity of the selected disks.