Owner's Manual
B-2
LSI SAS RAID
▍
MS-96E0
LSI SAS RAID
▍
MS-96E0
1. introduction to inteGrated raid
This section provides an overview of the LSI Logic Integrated RAID solution for LSI
Logic SAS controllers, its features, and its benets.
The LSI Logic Integrated RAID solution provides cost benets for the server or work-
station market where the extra performance, storage capacity, and/or redundancy of a
RAID conguration are required. The two components of Integrated RAID are:
Integrated Mirroring (IM), which provides features of RAID 1 and RAID 1E (RAID 1
Enhanced). RAID 1E is also called Integrated Mirroring Enhanced (IME)
Integrated Striping (IS), which provides features of RAID 0
By simplifying the IM and IS conguration options and by providing rmware support in
its host adapters, LSI Logic can offer the Integrated RAID solution at a lower cost than
a hardware RAID implementation.
Fusion-MPT™ rmware supports IM and IS volumes. You can congure IM and IS vol-
umes together on the same LSI Logic SAS controller.
Integrated RAID Benets and Features
Low cost RAID volume creation meets the needs of most internal RAID installa-
tions
Easy to use - installation and conguration are not complex
System can boot from an IM, IME, or IS volume
No special OS-specic software required
High reliability and data integrity
- Non-volatile write journaling
- Physical disks not visible to OS or to application software
Low host CPU and PCI bus utilization
Fusion-MPT architecture provides processing power
- Shared memory architecture minimizes external memory requests
- Functionality is contained in device hardware and rmware
■
■
■
■
■
■
■
■
■