Optix Series LCD Monitor Optix MPG341CQR (3DA0)
Contents Copyright and Trademarks Notice ��������������������������������������������������������������������������iii Revision ������������������������������������������������������������������������������������������������������������������iii Technical Support ���������������������������������������������������������������������������������������������������iii Safety Instructions ���������������������������������������������������������������������������������������������������iv CE Conformity ���������
Preface Copyright and Trademarks Notice Copyright © Micro-Star Int’l Co., Ltd. All rights reserved. The MSI logo used is a registered trademark of Micro-Star Int’l Co., Ltd. All other marks and names mentioned may be trademarks of their respective owners. No warranty as to accuracy or completeness is expressed or implied. MSI reserves the right to make changes to this document without prior notice. Revision Revision V1.
Safety Instructions ◙◙ ◙◙ ◙◙ Read the safety instructions carefully and thoroughly. All cautions and warnings on the device or user’s manual should be noted. Refer servicing to qualified personnel only. Keep the User’s Guide that comes with the package for future reference. To prevent fire or shock hazard, keep this device away from humidity and high temperature. Lay this device on a reliable flat surface before setting it up.
Preface Place the power cord in a way that people are unlikely to step on it. Do not place anything on the power cord. Always keep strong magnetic or electrical objects away from the device. If any of the following situations arises, get the device checked by service personnel: ◙◙ The power cord or plug is damaged. ◙◙ Liquid has penetrated into the device. ◙◙ The device has been exposed to moisture. ◙◙ The device does not work well or you can not get it work according to user’s manual.
CE Conformity This device complies with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility (2014/30/EU), Low-voltage Directive (2014/35/EU), ErP Directive (2009/125/EC) and RoHS directive (2011/65/ EU). This product has been tested and found to comply with the harmonized standards for Information Technology Equipment published under Directives of Official Journal of the European Union.
Preface WEEE Statement Under the European Union (“EU”) Directive on Waste Electrical and Electronic Equipment, Directive 2012/19/EU, which takes effect on August 13, 2005, products of “electrical and electronic equipment” cannot be discarded as municipal waste anymore and manufacturers of covered electronic equipment will be obligated to take back such products at the end of their useful life.
1 Getting Started This chapter provides you with the information on hardware setup procedures. While connecting devices, be careful in holding the devices and use a grounded wrist strap to avoid static electricity. IMPORTANT • • The illustrations are for reference only. Your monitor may vary in appearance. Do not use any sharp objects on the monitor.
Package Contents 1. Monitor 2. Stand 3. Stand Base with Screw 4. Wall Mount Screws x 4 5. Stand Screws x 4 6. VESA Cover 7. Power Cord 8. HDMI Cable 9. DisplayPort Cable 10. USB Upstream Cable (to enable the USB ports on the monitor) 11. Y-type Audio Cable (to enable the audio jacks on the monitor) 12. Quick Start Guide 13. Warranty Card 14. Mouse Bungee 15. Camera Cradle with Rotatable Ball Head 1-2 * Contact your place of purchase or local distributor if any of the items is damaged or missing.
Getting Started Installing the Monitor Stand 1. Align the latches of the stand to the monitor. Tighten the stand with the stand screws. 2. Adjust the angle of the stand. Align the latches to place the VESA cover. 3. Connect the base to the stand and tighten the base screw to secure the base. IMPORTANT Place the monitor on a soft, protected surface to avoid scratching the display panel. 1 2 3 IMPORTANT The holes for installing the stand can be also used for wall mount.
Adjusting the Monitor This monitor is designed to maximize your viewing comfort with its adjustment capabilities. IMPORTANT Avoid touching the display panel when adjusting the monitor.
Getting Started Monitor Overview 1 2 3 4 5 6 8 9 10 11 12 13 15 14 16 1 Power Jack 2 HDMI Port 7 1-5
3 DisplayPort 4 USB-C Port 5 USB3.1 Gen1 Type B Upstream Port This port can send simultaneously video signal and power stream up to 5V/3A. It doesn’t support data transmition function. For USB Upstream Cable. IMPORTANT Check the package for USB Upstream Cable and connect it to the PC and monitor. Once this cable is connected, the USB Type A Downstream Ports on the monitor will be ready for use. 1-6 6 USB3.1 Gen1 Type A Port 7 Combo Audio Jack To Monitor To PC For Y-type Audio Cable.
Getting Started 13 Kensington Lock 14 Power Button 15 Macro Key 16 Webcam To activate Gaming OSD.
Connecting the Monitor to PC 1. Turn off your computer. 2. Connect the HDMI/DisplayPort cable from the monitor to your computer. 3. Connect the power cord to the monitor power jack. (Figure A) 4. Plug the power cord into the electrical outlet. (Figure B) 5. Turn on the monitor. (Figure C) 6. Power on the computer and select your input source in OSD menu.
2 OSD Setup This chapter provides you with essential information on OSD Setup. IMPORTANT All information is subject to change without prior notice.
Navi Key The monitor comes with a Navi Key, a multi-directional control that helps navigate the On-Screen Display (OSD) menu. Navi Key 2-2 The Navi Key default settings are as follows.
OSD Setup Navi Key Hot Key Basic Operations (When OSD menu is OFF) (When OSD menu is ON) Up Game Mode ■■ Press Middle Button to confirm selection and exit. ■■ Press Up and Down Buttons to adjust. ■■ Press Left Button to cancel preview and exit without applying mode effect. ■■ Selecting function menus and items ■■ Allowing upward adjustment in function values Down Screen Assistance ■■ Press Middle Button to confirm selection and exit. ■■ Press Up and Down Buttons to adjust.
Users may enter the OSD Menu to customize their own Navi Key Hot Keys. More Hot Key options are as below. Navi Key Hot Key Options Operations Brightness ■■ Press Middle Button to save value and exit. ■■ Press Up and Down Buttons to adjust. ■■ Press Left Button to cancel preview and exit. PIP/PBP ■■ Press Middle Button to confirm selection and exit. ■■ Press Up and Down Buttons to adjust. ■■ Press Left Button to cancel preview and exit.
OSD Setup OSD Setup via Navi Key Press the Middle button of Navi Key to launch the On-Screen Display (OSD) main menu. Use the Up, Down, Left, Right buttons to tune the desired function menus to suit your personal preferences. 2-5 hh GAMING 1st Level Menu 2nd/3rd Level Menu Description Game Mode User All items can be adjusted by users. FPS All items can be adjusted by users. Racing All items can be adjusted by users. RTS All items can be adjusted by users.
1st Level Menu 2nd/3rd Level Menu Anti Motion Blur (OFF) (ON) Zero Latency ■■ Zero Latency default is ON. ■■ Zero Latency helps to reduce the signal throughput timing. (OFF) (ON) Refresh Rate Location Description ■■ Brightness cannot be adjusted when Anti Motion Blur is set to ON. ■■ When Anti Motion Blur is enabled, HDCR and Brightness cannot be enabled and will be grayed out. ■■ Response time will be grayed out while Anti Motion Blur is enabled.
OSD Setup hh Professional 1st Level Menu 2nd Level Menu Description Pro Mode User Default mode. All items can be adjusted by users. Reader All items can be adjusted by users. Cinema All items can be adjusted by users. Designer All items can be adjusted by users. ■■ Use Up or Down Button to select and preview mode effects. ■■ Press the Middle Button to confirm and apply your mode type.
1st Level Menu 2nd/3rd Level Menu Description Sharpness 0-5 ■■ Users can adjust Sharpness in any Mode. ■■ Sharpness improves clarity and details of images. Color Temperature Cool Normal ■■ Color Temperature default is Normal. ■■ Use Up or Down Button to select and preview mode effects. ■■ Press the Middle Button to confirm and apply your mode type. ■■ Users can adjust Color Temperature in Customization mode.
OSD Setup 1st Level Menu 2nd/3rd Level Menu OFF PIP Source PIP Size Location Display Switch Audio Switch PBP (X2/3/4) Source (1/2/3) Description ■■ PIP (Picture in Picture) allows users to simultaneously display multiple video HDMI1 sources on one screen. One program is HDMI2 displayed on the full screen at the same DP time as one or more other programs are displayed in inset windows.
hh Setting 1st Level Menu 2nd Level Menu Description Language 繁體中文 ■■ Language factory default is English. ■■ Users have to press the Middle Button to confirm and apply the Language setting. ■■ Language is an independent setting. Users’ own language setting will override the factory default. When users set Reset to Yes, Language will not be changed.
A Appendix IMPORTANT All information is subject to change without prior notice.
Specifications Model Optix MPG341CQR 3DA0 Size 34 inch Curvature 1800R Panel Type VA Resolution 3440 x 1440 (UWQHD ) Aspect Ratio 21:9 Brightness (nits) 400 Contrast Ratio 3000:1 Refresh Rate 144Hz Response Time 4ms MPRT A-2 1ms Input Interface ■■ HDMI x2 ■■ DP x1 ■■ USB-C x1 (for DP Alt Mode) I/O ■■ ■■ ■■ ■■ ■■ ■■ View Angles sRGB / DCI-P3 * Surface Treatment Display Colors USB 3.1 Gen1 Type A x2 USB 3.1 Gen1 Type A with Quick Charger x1 USB 3.
Appendix Model Optix MPG341CQR 3DA0 VESA Mounting Dimension (W x D x H) Weight Environment ■■ Plate Type: 100 x 100mm ■■ Screw Type: M4 x 10mm ▶▶ Thread Diameter: 4mm ▶▶ Thread Pitch: 0.7mm ▶▶ Thread Length: 10mm 810.6 x 324.2 x 563.0mm 9.7 kg (Net) , 13.5 kg (Gross) Operating Temperture: 0°C to 40°C Humidity: 20% to 90%, non-condensing Altitude: 0 ~ 5000m Storage Temperture: -20°C to 60°C Humidity: 10% to 90%, non-condensing * Based on CIE1976 test standards.
Preset Display Modes MPG341CQR Resolution 640x480 @60Hz A-4 HDMI 3DA0 V DP V 640x480 @67Hz V V 640x480 @72Hz V V 640x480 @75Hz V V 720×400 @70Hz V V 800x600 @56Hz V V 800x600 @60Hz V V 800x600 @72Hz V V 800x600 @75Hz V V 1024x768 @60Hz V V 1024x768 @70Hz V V 1024x768 @75Hz V V 1280x720 @60Hz V V 1280x960 @60Hz V V 1280x1024 @60Hz V V 1152x864 @75Hz V V 1440x900 @60Hz V V 1680x1050 @60Hz V V 1920x1080 @60Hz V V 2560x1080 @60Hz V V 2560x1080 @100H
Appendix Troubleshooting The power LED is off. ■■ Press the monitor power button again. ■■ Check if the monitor power cable is properly connected. No image. ■■ Check if the computer graphics card is properly installed. ■■ Check if the computer and monitor are connected to electrical outlets and are turned on. ■■ Check if the monitor signal cable is properly connected. ■■ The computer may be in Standby mode. Press any key to activate the monitor. The screen image is not properly sized or centered.
