Specifications

162 IBM Flex System p260 and p460 Planning and Implementation Guide
The Chassis Management Modules are inserted in the back of the chassis, and
are vertically oriented. When looking at the back of the chassis, the Chassis
Management Module bays are on the far right. The Chassis Manager tab in FSM
shows this configuration clearly, as shown in Figure 6-3.
Figure 6-3 FSM chassis manager table view that shows the Chassis Management
Module bays
The Chassis Management Module can also be seen in the Chassis Management
Module GUI, as shown in Figure 6-4.
Figure 6-4 View of the Chassis Management Module in the GUI
The following section describes the usage models and features of the Chassis
Management Module.
Bay 1: present
Bay 2: optional
Bay 1: present
Bay 2: optional