Specifications

Chapter 6. Management setup 167
When the wizard starts, the first window shows the steps that are performed
on the left side of the window, and a basic description of the steps in the
main field.
Figure 6-9 shows the Welcome window of the setup wizard. This wizard is
similar to other IBM wizards. Navigation buttons for the wizard are in the lower
left of each window.
Figure 6-9 Chassis Management Module initial setup wizard Welcome window
4. Proceed through each step of the wizard by clicking Next, entering the
information as required.
5. Click Finish to complete the last step of the wizard.
For further details about using the Chassis Management Module, see 6.2.2,
“CMM functions” on page 168.