Specifications

188 IBM Flex System p260 and p460 Planning and Implementation Guide
To access the node through the CMM, complete the following steps:
1. Open a browser and point it to the following URL (where system_name is the
host name or IP address of the Chassis Management Module):
https://system_name
The window in Figure 6-32 opens.
Figure 6-32 Chassis Management Module login window
Important: When a Power Systems compute node is discovered and
managed by a Flex System Manager, Serial Over LAN (SOL) must be
disabled. Given that the Power Systems compute node is ordered as part of
one of the IBM PureFlex System configurations, it is discovered and managed
by a Flex System Manager. Therefore, the Chassis Management Module
access is disabled in most cases. This section is intended to address
situations where an additional Power Systems compute node is ordered for an
existing Enterprise Chassis. In that case, the Power Systems compute node is
not discovered by an Flex System Manager and can be managed and
installed using the Chassis Management Module.