Specifications

Chapter 6. Management setup 213
After completing the previous step, the wizard cycles back to the Initial LAN
Adapter window and preselects the next adapter in the list, as shown in
Figure 6-54.
Figure 6-54 FSM LAN adapter configuration continue option
In our example, we are using a combined network topology and a single
adapter, so additional IP addresses are not needed.
11.Select No by the question, “Do you want to configure another LAN adapter?”,
as shown in figure Figure 6-54.
Click Next to continue.
12.After IP address assignment, the host name and gateway are configured as
shown in Figure 6-55. Enter the wanted host name, domain name, and default
gateway address. Note the IP address and the default gateway adapter in the
drop-down menu and ensure that the values
are correct.
Figure 6-55 FSM host name and gateway configuration