Specifications

Chapter 6. Management setup 221
A Getting Started window opens and reminds you that initial setup tasks must
be completed (Figure 6-66).
Figure 6-66 FSM Getting Started reminder
The startup wizard and initial login are complete. The FSM is ready for further
configuration and use. Our example uses a console from the remote console
function of the IMMv2. At this time, a secure browser session can be started to
the FSM.
6.5.2 Flex System Manager Update Manager configuration
The IBM Flex System Manager Update Manager is responsible for obtaining and
applying chassis, switch, system firmware, and operating system updates from
IBM. In addition, the Update Manager is used to update the FSM itself. The
updates can be obtained through an Internet connection from the FSM, or they
can be downloaded manually from IBM to another workstation, then copied to the
FSM by an FTP or SCP connection. After the files are copied to the FSM, they
must be imported into the Update Manager.
To download these updates, we must set up the Internet connection, as
described in “Direct Internet connection” on page 222.