Specifications

Chapter 6. Management setup 249
If Serial Over LAN (SOL) is not disabled, you receive the error shown in
Figure 6-101. To learn the process to disable SOL, see 6.6.3, “Disabling
Serial Over LAN (SOL)” on page 249.
Figure 6-101 Console open failure on virtual server ID 1 with SOL enabled
6.6.3 Disabling Serial Over LAN (SOL)
When a Power Systems compute node is managed by an IBM Flex System
Manager, you must disable SOL on the chassis.
Accessing the Chassis Management Module using a browser
To access the CMM through a web browser, complete the following steps:
1. Open a browser and point it to the following URL, where system_name is the
host name or IP address of the Chassis Management Module:
https://system_name
Important: There is an option to disable SOL at the individual compute
node level.