Specifications

254 IBM Flex System p260 and p460 Planning and Implementation Guide
After you select the chassis (as shown in Figure 6-105 on page 253), you can
start managing it, and a window similar to Figure 6-106 opens. You see a front
and back graphical view of the chassis. Click a component, and click Action
to select actions applicable to that component (see the area marked
“Selected component properties” in Figure 6-106). Actions include restart,
power off, access to a command line or console, and so on.
Figure 6-106 Selected Chassis Management
Chassis Management Modules - Check and Update Firmware
If your IBM Flex System Manager is connected to the Internet, you can update
your firmware directly from the Internet. If your IBM Flex System Manager is not
directly connected to the Internet, you can download the firmware manually from
another system, then upload it manually to your IBM Flex System Manager.
Selected component properties
Compute nodes
I/O modules
Front chassis view
Back chassis view