Specifications

268 IBM Flex System p260 and p460 Planning and Implementation Guide
򐂰 Show and install updates: After obtaining the updates (using the Internet or
manual download), you can view and install them using this setting. A
firmware upgrade example for a Power Systems compute node, including
captures, is shown in 8.1.5, “Firmware update using IBM Flex System
Manager” on page 328.
򐂰 Compliance Policies: Using this setting, you can define compliance policies
for specific systems to ensure that they are consistently at the wanted update
level, and then monitor the adherence of each system to the policy.
򐂰 Quick Access: You can use this setting to access shortcuts to the most
frequently used firmware actions, such as configure settings, Flex Systems
Manager Check and Update, and Show Installed Updates.
Automation Manager
This feature shows an overview of active and scheduled jobs for your IBM Flex
System Manager, including information about completed, failed, and
upcoming jobs.
Active Energy Manager
This feature manages the energy settings of your IBM Flex System Manager
managed systems. Detailed information about this feature is in Implementing
IBM Systems Director Active Energy Manager 4.1.1, SG24-7780.
Remote Access
You can use this feature to access managed systems using CLI, web access,
remote access, or remote control. Access depends on the type of system, for
example, I/O modules might have web and CLI access, but not remote.
Computer nodes might have CLI, remote control, and web access.
Storage management
For more information about this feature, see “Manage System Storage” on
page 261.
Network Control with Service Fabric Provisioning
For more information about this feature, see “Manage Network Devices” on
page 262.