Specifications

314 IBM Flex System p260 and p460 Planning and Implementation Guide
11.Do not select physical adapters for IBM i virtual servers, as shown in
Figure 7-28 on page 313. Click Next in this window to proceed to the Load
Source and Console settings, as shown in Figure 7-29.
Figure 7-29 IBM i virtual server load source and console settings
12.Choose the virtual SCSI as the Load Source. Click Next to proceed to
the Summary.
13.Review the settings on the Summary page, and click Finish to complete
the definition.
The IBM i virtual server is now ready to be activated for load.
Important: Do not forget to configure the virtual SCSI server adapter on
the VIOS that this virtual SCSI client adapter refers to. In addition, disks
must be provisioned to the virtual SCSI server adapter in the VIOS to be
used by the IBM i virtual server (operating system and data).
To use a virtual optical drive from the VIOS for the IBM i operating system
installation, the installation media ISO files must be copied to the VIOS,
and the virtual optical devices must be created.