Specifications

326 IBM Flex System p260 and p460 Planning and Implementation Guide
To verify the system firmware levels, complete the following steps:
1. Start the in-band diagnostics program by running the following command:
diag
2. From the Function Selection menu, select Task Selection and press Enter, as
shown in Figure 8-3 on page 323.
3. From the Tasks Selection List menu, select Microcode Tasks  Display
Microcode Level and press Enter, as shown in Figure 8-6.
Figure 8-6 Display microcode level
Microcode Tasks 801004
Move cursor to desired item and press Enter.
Display Microcode Level
Download Latest Available Microcode
Generic Microcode Download
F1=Help F4=List Esc+0=Exit Enter
F3=Previous Menu