User`s manual
C-4
Marvell RAID
MS-7681
Appendx C
Marvell RAID
MS-7681
Appendx C
Create vrtual dsk by congurng ts settngs n the “Informaton” pane. as shown
below. And refer the descrpton below to congure the vrtual dsk settngs.
3.
Marvell BIOS Setup (c) xxxx Marvell Technology Group Ltd.
Congure -> Select free dsks
Help
Vrtual dsk conguratons.
ENTER: Operaton F10: Ext/ Save ESC: Return
HBA 0: Marvell 0
Vrtual Dsks
Free physcal Dsks
* PD 0: ST3750330MS
* PD 8: ST3750330MS
RAID Level
PD ID
Strpe Sze
Ggabyte Roundng
Quck Int
VD Name
Current Speed
Next
: RAID 0
: 1987739
: 64KB
: 1G
: YES
: Default
: 0 8
Create Vrtual Dsk
RAID Level, select a RAID level (RAID 0, RAID 1).
Max Sze (MB), s the sze of the RAID vrtual dsk as determned by the selected
RAID level. It s property of the vrtual dsk that cannot be edted.
Strpe Sze, speces the sze (32K, 64K) of sngle data block on the vrtual dsk.
The larger the strpe sze, the longer t takes for the controller to read from and
wrte to data blocks on the physcal dsks. In general, a larger strpe sze s recom
-
mended for most applcatons. The default sze s 64K.
Ggabyte Roundng, dene the exblty n sze for a replacement physcal dsk
that s used to rebuld a degraded vrtual dsk. It s applcable to RAID 1 level only.
Although the selecton remans avalable for RAID 0, t only aects the sze of the
RAID 0 vrtual dsk (because RAID 0 does not oer redundancy).
Quck Int, enable or dsable quck ntalzaton of the vrtual dsk. The default set
-
tng for [Quck Int] s “Yes”.
VD Name, type a new vrtual dsk name.
Dsk ID, lsts the IDs of the physcal dsks comprsng the vrtual dsk. It s property
of the vrtual dsk that cannot be edted.
■
■
■
■
■
■
■