User's Manual NOTEBOOK
Content Copyright and Trademarks Notice.................................................................................1-4 Revision History............................................................................................................1-4 FCC-B Radio Frequency Interference Statement.........................................................1-5 FCC Conditions.............................................................................................................1-5 CE Conformity...............
User's Manual Screen Rotation.....................................................................................................2-14 Screen Capture......................................................................................................2-14 Use Multiple Monitors.............................................................................................2-14 Adjust the Brightness Level of the Display ............................................................
Copyright and Trademarks Notice Copyright © Micro-Star Int’l Co., Ltd. All rights reserved. The MSI logo used is a registered trademark of Micro-Star Int’l Co., Ltd. All other marks and names mentioned may be trademarks of their respective owners. No warranty as to accuracy or completeness is expressed or implied. MSI reserves the right to make changes to this document without prior notice. Revision History ▶ Version: 1.
User's Manual FCC-B Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and radiates radio frequency energy, and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Battery Regulations European Union: Batteries, battery packs, and accumulators should not be disposed of as unsorted household waste. Please use the public collection system to return, recycle, or treat them in compliance with the local regulations. Taiwan: For better environmental protection, waste batteries should be collected separately for recycling or special disposal.
User's Manual RoHS Statement Japan JIS C 0950 Material Declaration A Japanese regulatory requirement, defined by specification JIS C 0950, mandates that manufacturers provide material declarations for certain categories of electronic products offered for sale after July 1, 2006. http://www.msi.com/html/popup/csr/cemm_jp.html http://tw.msi.com/html/popup/csr_tw/cemm_jp.
Upgrade and Warranty Please note that certain components, such as memory modules, HDD, SSD, ODD, and Bluetooth/WiFi combo card, etc., preinstalled in the product may be upgradable or replaceable by user’s request depending on the models users purchased. For any further information on the product users purchased, please contact the local dealer.
User's Manual Safety Instructions Read the safety instructions carefully and thoroughly. All cautions and warnings on the equipment or user’s manual should be noted. Keep the notebook away from humidity and high temperature. Lay the notebook on a stable surface before setting it up. Do not cover the ventilators of the notebook to prevent the notebook from overheating.
If any of the following situations arises, get the equipment checked by a service personnel: • • • • The power cord or plug is damaged. Liquid has penetrated into the equipment. The equipment has been exposed to moisture. The equipment has not worked well or you can not get it work according to User’s Manual. • The equipment was dropped and damaged. • The equipment has obvious signs of breakage.
User's Manual MSI Highlights Explore more exclusive features of MSI notebooks for all series, please visit: http://www.msi.com and https://www.youtube.com/user/MSI How to use SteelSeries Engine 3 on MSI notebooks MSI collaborates with SteelSeries to develop an exclusive SteelSeries Engine 3 in gaming notebooks. SteelSeries Engine 3 is the Apps to combine frequently used functions for gamers in multiple devices management.
1-12
Introductions User's Manual NOTEBOOK
Introductions Congratulations on becoming an user of this notebook, the finely designed notebook. You will have a delightful and professional experience in using this exquisite notebook. We are proud to tell users that this notebook is thoroughly tested and certified by our reputation for unsurpassed dependability and customer satisfaction. Unpacking First, unpack the shipping carton and check all items carefully. If any item contained is damaged or missing, please contact your local dealer immediately.
User's Manual Product Overview This section provides the description of basic aspects of the notebook. It will help you to know more about the appearance of this notebook before using it. Please be aware that the figures shown here are for reference only. Top-open View The figure of top-open view and description shown below will lead you to browse the main operating area of your notebook.
Introductions 1. Webcam/ Webcam LED/ Internal Microphone • This built-in webcam can be used for picture taking, video recording or conferencing, and so on. • The built-in webcam is IR Camera which supports infrared face recognition function. Refer to How to Set Up Windows Hello Face Login in chapter 3 for details.(optional) • Webcam LED indicator, next to the webcam, blinks when webcam function is activated; LED goes out when this function is turned off.
User's Manual 5. Fingerprint Sensor Use the fingerprint sensor to set up user’s fingerprints on the notebook, and use it to unlock the notebook. Refer to How to Set Up Windows Hello Fingerprint Login in chapter 3 for details. 6. Status LED Caps Lock Glows when the Caps Lock function is activated.
Introductions Front Side View 2-6
User's Manual Right Side View 1. Combo Audio Port • A port for headsets with attached microphones. • The Combo Audio Port supports 4-Pole 3.5mm headphone jack. 2. USB 2.0 Port The USB 2.0 port allows you to connect USB-interface peripheral devices, such as the mouse, keyboard, modem, portable hard disk module, printer, etc.
Introductions Left Side View 1. Power/ Thunderbolt (Type-C) combo ports • Always plug the provided AC/DC adapter that comes with the package to either port to supply power to the notebook and charge the battery pack. • Thunderbolt™ 3 supports USB 3.2 Gen 2, PCIe, HDMI, DisplayPort connection; 4K display monitor output; up to 40Gbps data rate; and 5V/3A portable charging power output (follow the Intel Thunderbolt protocol specification). • The notebook can be charged via this port with a power bank.
User's Manual Battery Status • LED glows when the battery is being charged. • LED turns glowing amber while the battery is in low capacity status. • Continuously blinking if the battery fails. If the problem persists, please contact your local authorized retailer or service center. • Battery LED goes out when it is fully charged or when the AC/DC adapter is disconnected. 3. Card Reader The built-in card reader supports various types of memory cards. Check the Specifications for details.
Introductions Rear Side View 2-10
User's Manual Bottom Side View 1. Ventilator The ventilator is designed to cool the system. DO NOT block the ventilator for air circulation. 2. Battery Reset Hole Whenever the system firmware (EC) is upgraded or the system hangs, please 1) power off the notebook; 2) remove the AC power; 3) use a straightened paperclip and insert it to this hole for 10 secs; 4) connect the AC power; 5) power on the notebook. 3.
Introductions How to Use the Keyboard This notebook provides a full functioned keyboard. To ensure that the keyboard will be functioning properly, it is a must to install the necessary applications before using the keyboard function keys. Use the FN keys on the keyboard to activate the specific applications or tools. With the help of these keys, users will be able to work more efficiently. Power Key/ Enter Sleep Mode • Press this key to turn the notebook power ON.
User's Manual Quick Use FN keys + • This notebook is equipped a set of quick FN function keys. Each function key, F1 to F12, is available to use with an easy single press by default. • Users are allowed to disable the default FN function keys by pressing FN and ESC keys. • The FN Lock LED indicator, located on the ESC keycap, glows when the default FN function keys are disabled. • Press again to restore the default FN functions, and the FN Lock LED indicator goes out.
Introductions Switch Display Switch the display output mode between the LCD, external monitor and both. Screen Rotation Press to rotate the screen upside down for 180 degrees. Press again to rotate the screen back to its default position. Screen Capture + It is a must to use both keys to take a screen capture to the clipboard, and then it can be pasted into an editing program.
User's Manual Adjust the Sound Level of the Speaker Increase the built-in speaker’s volume. Decrease the built-in speaker’s volume. • Mute the built-in speakers. • The Mute LED indicator, located on the F1 keycap, glows when the sound is muted. Select a Keyboard Backlight LED Level Press repeatedly to select a backlight LED level according to your preference. Application: True Color (optional) This notebook may be pre-installed the True Color application.
Introductions Specifications The specifications listed here is reference only, and may change without notice. The actual products sold are different from areas. Visit MSI official website at www.msi.com, or contact the local retailers to learn the correct specifications of the product user purchased. Physical Characteristic Dimension 319 (W) x 219 (D) x 15.9 (H) mm Weight 1.
User's Manual I/O Port USB 2 x USB 2.0 2 x USB 3.2 Gen 2 Type-C ThunderboltTM 3 • • • • PCIe, HDMI, DisplayPort connection optionally supported 4K display monitor output up to 40Gbps data rate supports 5V/3A portable charging power output. Audio 1 x Mic-in/ Headphone-out combo Card Reader 1 x MicroSD (5.
Introductions 2-18
How to Get Started User's Manual NOTEBOOK
How to Get Started Begin to Use the Notebook For a new user of this notebook, we would like to suggest you follow the illustrations below to begin to use the notebook.
User's Manual How to Use the Notebook Comfortably If you are a beginner to the notebook, please read the following instructions to assure your own safety, and make yourself comfortable during the operations. ▶▶ Good illumination is essential in the work area. ▶▶ Choose a chair and desk with good ergonomics and adjust their heights according to your posture. ▶▶ Adjust the backrest to support your lower back comfortably when you are sitting upright.
How to Get Started How to Manage Power Supply This section provides users basic safety precautions to take when using an AC/DC adapter and battery power properly. AC/DC Adapter Ensure that your notebook is connected to an AC power source via the AC adapter before turning it on for the first time. If the notebook automatically shuts down due to low battery power, it is likely to cause system failure. Below are some Dos and Don'ts of an AC/DC adapter.
User's Manual ▶▶ Battery type • This notebook may be equipped with a high-capacity Li-ion or Li-polymer battery pack depending on the model you have. • The rechargeable battery pack is an internal power source of the notebook. ▶▶ Battery charging behavior To optimize battery life and avoid a sudden power loss, read the tips below: • Suspend system operation if the system will be idle for a while or shorten the suspend timer’s time period. • Turn off the system if you won’t be using it for a period of time.
How to Get Started How to Set Up a Power Plan in Windows 10 A power plan is a collection of hardware and system settings that manages how your computer uses and conserves power. Power plans can save energy, maximize system performance, or balance energy conservation with performance. The default power plans — Balanced and Power saver — meet most people's needs. But you can modify settings for existing plans or create your own plan. Choose or Customize a Power Plan 1.
User's Manual 3-7
How to Get Started 3-8
User's Manual Create Your Own Power Plan You can create your own power plan and customize it as your requirement. However, it will be recommended to use ECO Mode power saving function to optimize the battery life while using this notebook. 1. Select Power Options in the menu. Click [Create a power plan] in the left pane. 2. Select an existing plan that meet your needs most, and give the plan a name. Click [Next] to continue. 3. Change the settings for the new power plan.
How to Get Started 3-10
User's Manual How to Set Up Windows Hello Fingerprint Login Windows Hello is a more secure, personal way to get instant access to your Windows 10 devices using fingerprint or facial recognition. The feature requires fingerprint reader or a infrared camera that supports it. Once you’re set up, you’ll be able to sign in with a quick swipe or glance. Follow below instructions to login with a touch. You need to set up a password and PIN code before you're allowed to use Windows. ▶▶ Create a Password 1.
How to Get Started 3-12
User's Manual ▶▶ Set up a PIN 1. Click Windows Hello PIN. 2. Click [Add] to continue. 3. You may be asked to verify in your account with the password. Set up a PIN and then re-enter to confirm, click [OK] to close.
How to Get Started ▶▶ Set up a Fingerprint 1. Click Windows Hello Fingerprint. 2. Click [Set up]. 3. On the Windows Hello setup wizard, click [Get started] button. 4. Place your preferred finger on the upper-left corner of the touchpad. You will be asked swipe the same finger for a few times to setup Windows Hello. 5. Click [Add Another] if you want to repeat the process with another finger, or close the program.
User's Manual 3-15
How to Get Started How to Set Up Windows Hello Face Login Windows Hello is a more secure, personal way to get instant access to your Windows 10 devices using fingerprint or facial recognition. The feature requires fingerprint reader or a infrared camera that supports it. Once you’re set up, you’ll be able to sign in with a quick swipe or glance. Follow below instructions to login with a look. You need to set up a password and PIN code before you're allowed to use Windows. ▶▶ Create a Password 1.
User's Manual 3-17
How to Get Started ▶▶ Set up a PIN 1. Click Windows Hello PIN. 2. Click [Add] to continue. 3. You may be asked to verify in your account with the password. Set up a PIN and then re-enter to confirm, click [OK] to close.
User's Manual ▶▶ Set up a Facial Login with IR Camera 1. In Sign-in options, click the [Set up] button under Windows Hello Face. 2. On the Windows Hello setup wizard, click [Get started] button. 3. Position your face in the center of the frame that appears on screen. The camera will register your face. 4. Complete the setup, Improve recognition which is useful for users wearing glasses. It allows you to be recorded with/without glasses on. The option to Remove the facial login is here as well.
How to Get Started 3-20
User's Manual How to Use the Touchpad The touchpad integrated in your notebook is a pointing device that is compatible with standard mouse, allowing you to control the notebook by pointing the location of the cursor on the screen. ▶▶ Configure the Touchpad You can customize the pointing device to meet your personal needs. For example, if you are a left-handed user, you may want to swap the functions of the two buttons.
How to Get Started ▶▶ Point and Click When you have moved and placed the cursor over an icon, a menu item or a command that you want to execute, simply tap slightly on the touchpad or press the left button to select. This procedure, called as point and click is the basics of operating your notebook. Unlike the traditional pointing device such as the mouse, the whole touchpad can act as a left button, so that your each tap on the touchpad is equivalent to pressing the left button.
User's Manual How to Connect the Internet Wireless LAN Wireless LAN is a wireless broadband connection that allows you to connect to the Internet without using any cables. Follow the instructions below to set up a Wireless LAN connection. ▶▶ Wireless LAN Connection 1. Go to the desktop. Find the icon in the lower-right corner of the task bar and click on it to unfold the settings menu. 2. There are [Wi-Fi] and [Airplane mode] two options in the Network settings, select [Wi-Fi] here. 3.
How to Get Started ▶▶ Check the Wireless LAN status When Airplane mode is enabled, Wireless LAN connection will be turned off. Before setting up a Wireless LAN connection, make sure that Airplane mode is turned off. 1. Go to the desktop. Find the icon in the lower-right corner of the task bar and click on it to unfold the settings menu. 2. Check if Wireless LAN mode is available in the Network settings.
User's Manual Wired LAN Using cables and network adapters to connect to the Internet. Before setting up the connection of Dynamic IP/PPPoE or Broadband (PPPoE) or Static IP, contact your Internet Service Provider (ISP) or network administrator for assistance of setting up Internet connection. ▶▶ Dynamic IP/PPPoE Connection 1. Go to the desktop. Find the icon in the lower-right corner of the task bar, and then right click on it to select [Open Network & Internet settings]. 2.
How to Get Started 3-26
User's Manual ▶▶ Broadband (PPPoE) Connection 1. Go to the desktop. Find the icon in the lower-right corner of the task bar, right click on it to select [Open Network & Internet settings]. 2. Select [Network and Sharing Center] and then select [Set up a new connection or network] under [Change your networking settings]. 3. Select [Connect to the Internet], and then click [Next]. 4. Click [Broadband (PPPoE)]. 5. Fills User name, Password, and Connection name fields. Then click [Connect].
How to Get Started 3-28
User's Manual ▶▶ Static IP Connection 1. Follow the previous steps 1 to 4 in Dynamic IP/PPPoE Connection. 2. Select [General] tab and click [Use the following IP address] and [Use the following DNS server addresses]. You will be asked to fill the IP address, Subnet mask, and Default gateway, and then click [OK].
How to Get Started How to Set Up Bluetooth Connection Bluetooth pairing is a process in which two Bluetooth devices communicate with each other through an established connection. Activating Bluetooth Connection ▶▶ Checking the Bluetooth status When Airplane mode is enabled, Bluetooth connection will be turned off. Before setting up a Bluetooth connection, make sure that Airplane mode is turned off. 1. Go to the desktop. Find the right click on it. 2.
User's Manual 3-31
How to Get Started ▶▶ Pairing the Bluetooth devices 1. Go to [Start/ Settings/ Devices], and then find [Bluetooth & other devices]. 2. Click on [Add Bluetooth or other device]. 3. Click on [Bluetooth]. 4. Select a device to start pairing. 5. Give the passcode as instructed by the device waiting to be connected, and then click on [Connect] to continue.
User's Manual How to Connect External Devices This notebook may be equipped with various connecting I/O (input/output) ports, such as USB, HDMI, DisplayPort, and mini DisplayPort. Users will be able to connect diverse peripheral devices to the notebook. To connect these devices, refer to the instruction manuals of each device first, and then connect the device to the notebook.
How to Get Started Video: How to Use RAID Function This notebook may support RAID function of different levels. RAID allows users to store data on multiple hard disk drives or solid state drives. Contact the local dealer for further and correct information and be noted that the supported RAID functions may vary depending on the models users purchased. Watch the instruction video at: https://youtu.
User's Manual How to Select Boot Mode in BIOS 1. Power on the system. As soon as the first logo screen appears, press the DEL key immediately and enter the BIOS menu. 2. Move the cursor to [Boot] tab, and select [Boot mode select] in Boot Configuration. 3. For operating system supports UEFI-based BIOS (Windows 10), it is suggested to select [UEFI]. 4. Refer to MSI FAQ for further information about installing Windows operating system on the notebook at https://www.msi.
How to Get Started Video: How to Restore Windows 10 Operating System on MSI Notebooks Watch the instruction video at: https://www.youtube.com/watch?v=hSrK6xAQooU, to restore the Windows 10 operating system by using [F3 Recovery] and [Windows 10 Settings] when it is needed.
User's Manual Video: How to Use MSI One Touch Install MSI "One Touch Install", the one-click installer application, allows users to efficiently install all needed drivers on MSI notebooks with single click. Watch the instruction video at: Windows 10/ 8.1: https://www.youtube.com/watch?v=ERItRaJUKQs Windows 7: https://www.youtube.com/watch?v=43lnM4m-500 Windows 10/ 8.
