USER GUIDE Gaming｜Content Creation｜Business & Productivity
USER GUIDE NOTEBOOK 1-2
Content Copyright and Trademarks Notice.................................................................................1-5 Revision History............................................................................................................1-5 FCC-B Radio Frequency Interference Statement.........................................................1-6 CE Conformity...............................................................................................................1-7 Battery Regulations........
How to Get Started.......................................................................3-1 Begin to Use the Notebook...........................................................................................3-2 How to Use the Notebook Comfortably.........................................................................3-3 How to Manage Power Supply......................................................................................3-4 AC/DC Adapter.......................................................
Copyright and Trademarks Notice Copyright © Micro-Star Int’l Co., Ltd. All rights reserved. The MSI logo used is a registered trademark of Micro-Star Int’l Co., Ltd. All other marks and names mentioned may be trademarks of their respective owners. No warranty as to accuracy or completeness is expressed or implied. MSI reserves the right to make changes to this document without prior notice. Revision History ▶ Version: 1.
FCC-B Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and radiates radio frequency energy, and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
CE Conformity This device is in compliance with the essential safety requirements and other relevant provisions set out in the European Directive. Battery Regulations European Union: Batteries, battery packs, and accumulators should not be disposed of as unsorted household waste. Please use the public collection system to return, recycle, or treat them in compliance with the local regulations.
Chemical Substances Information In compliance with chemical substances regulations, such as the EU REACH Regulation (Regulation EC No. 1907/2006 of the European Parliament and the Council), MSI provides the information of chemical substances in products at: http://www.msi.com/html/popup/csr/evmtprtt_pcm.
Upgrade and Warranty Please note that certain components, such as memory modules, HDD, SSD, ODD, and Bluetooth/WiFi combo card, etc., preinstalled in the product may be upgradable or replaceable by user’s request depending on the models users purchased. For any further information on the product users purchased, please contact the local dealer.
Safety Instructions Read the safety instructions carefully and thoroughly. All cautions and warnings on the equipment or user’s manual should be noted. • Replacement of a battery with an incorrect type that can defeat a safeguard. • Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
WARNING: Do not ingest battery. If the coin / button cell battery is swallowed, it can cause severe internal burns and can lead to death. Keep new and used batteries away from children. Keep the notebook away from humidity and high temperature. Always keep the strong magnetic or electrical objects away from the notebook. • Do not leave the notebook in an unconditioned environment with a storage temperature above 60ºC (140ºF) or below 0ºC (32ºF), which may damage the notebook.
Green Product Features • • • • • • Reduced energy consumption during use and stand-by Limited use of substances harmful to the environment and health Easily dismantled and recycled Reduced use of natural resources by encouraging recycling Extended product lifetime through easy upgrades Reduced solid waste production through take-back policy Environmental Policy • The product has been designed to enable proper reuse of parts and recycling and should not be thrown away at its end of life.
MSI Highlights Explore more exclusive features of MSI notebooks for all series, please visit: http://www.msi.com and https://www.youtube.com/user/MSI How to use SteelSeries Engine 3 on MSI notebooks MSI collaborates with SteelSeries to develop an exclusive SteelSeries Engine 3 in gaming notebooks. SteelSeries Engine 3 is the Apps to combine frequently used functions for gamers in multiple devices management.
1-14
Introductions
Introductions Congratulations on becoming an user of this notebook, the finely designed notebook. You will have a delightful and professional experience in using this exquisite notebook. We are proud to tell users that this notebook is thoroughly tested and certified by our reputation for unsurpassed dependability and customer satisfaction. Unpacking First, unpack the shipping carton and check all items carefully. If any item contained is damaged or missing, please contact your local dealer immediately.
Product Overview This section provides the description of basic aspects of the notebook. It will help you to know more about the appearance of this notebook before using it. Please be aware that the figures shown here are for reference only. Top-open View The figure of top-open view and description shown below will lead you to browse the main operating area of your notebook.
Introductions 1. Webcam/ Webcam LED/ Internal Microphone • This built-in webcam can be used for picture taking, video recording or conferencing, and so on. • The built-in webcam is IR Camera which supports infrared face recognition function. Refer to How to Set Up Windows Hello Face Login in chapter 3 for details.(optional). • Webcam LED indicator, next to the webcam, blinks when webcam function is activated; LED goes out when this function is turned off.
6. Status LED Caps Lock Glows when the Caps Lock function is activated.
Introductions Front Side View Blank below 2-6
Right Side View 1. Card Reader The built-in card reader supports various types of memory cards. Check the Specifications for details. 2. USB 3.2 Gen 2 Port USB 3.2 Gen 2, the SuperSpeed USB 10Gbps, delivers the higher interface speeds for connecting various devices, such as storage devices, hard drives, or video cameras, and offers more advantages over high-speed data transferring.
Introductions Left Side View 1. Power/ Thunderbolt (Type-C) combo ports (optional) • Always plug the provided AC/DC adapter that comes with the package to either port to supply power to the notebook and charge the battery pack. • Thunderbolt™ 4 supports USB 4.0, PCIe, HDMI, DisplayPort connection; 8K display monitor output; up to 40Gbps data rate; and 5V/3A portable charging power output (follow the Intel® ThunderboltTM protocol specification).
4. HDMI Connector HDMI (High-Definition Multimedia Interface) technology is the industry-leading interface and de-facto standard connecting high-definition (HD) and ultra highdefinition (UHD) equipment. 5. Power LED • LED glows when the notebook power is turned on. • LED goes off when the notebook is turned off.
Introductions Rear Side View Blank below 2-10
Bottom Side View 1. Ventilator The ventilator is designed to cool the system. DO NOT block the ventilator for air circulation. 2. Battery Reset Hole Whenever the system firmware (EC) is upgraded or the system hangs, please 1) power off the notebook; 2) remove the AC power; 3) use a straightened paperclip and insert it to this hole for 10 secs; 4) connect the AC power; 5) power on the notebook. 3.
Introductions 5. SSD Slot 2 This notebook is equipped with a SSD M.2 slot that supports the SSD device with PCIe interface. It is always suggested to contact the authorized dealer or service center for product service.
How to Use the Keyboard This notebook provides a full functioned keyboard. To ensure that the keyboard will be functioning properly, it is a must to install the necessary applications before using the keyboard function keys. Use the FN keys on the keyboard to activate the specific applications or tools. With the help of these keys, users will be able to work more efficiently.
Introductions Enable Quick FN Launch Keys + • This notebook is equipped a set of Quick FN Launch Keys. Each function key, F1 to F12, is available to use with an easy single press. • Users can disable the normal FN keys by press FN and ESC keys to enable Quick FN Launch Keys. Refer to Use Quick FN Launch Keys for details. • The FN Lock LED indicator, located on the ESC keycap, glows when the normal FN function keys are enabled and Quick FN Launch Keys are disabled.
MSI Center • This notebook may be pre-installing with a versatile utility, MSI Center, providing users an astonished and efficient solution in multitasking. • Use this key to switch the User Scenario in MSI Center. Keyboard Backlight LED Settings Press repeatedly to select a backlight LED level according to your preference. LCD Brightness Settings • F9: Decrease the LCD brightness. • F10: Increase the LCD brightness. Switch Display Switch the display output mode between the LCD, external monitor and both.
Introductions Use Multiple Monitors If users connect an additional monitor to the notebook, the system will automatically detect the external monitor connected. Users will be allowed to customize the display settings. + • Connect the monitor to the notebook. • Press and hold the Windows key, and then press [P] key to bring up [Project]. • Select how you want your display to project on the second screen from the selections of PC screen only, Duplicate, Extend, and Second screen only.
Specifications The specifications listed here is reference only, and may change without notice. The actual products sold are different from areas. Visit MSI official website at www.msi.com, or contact the local retailers to learn the correct specifications of the product user purchased. Physical Characteristic Dimension 356.8 (W) x 233.75 (D) x 16.9 (H) mm Weight 1.69 kg (non-touch screen) 1.
Introductions I/O Port USB 2 x USB 3.2 Gen 2 2 x USB 4.0 Type-C (optional) ThunderboltTM 4 • • • • PCIe, HDMI, DisplayPort connection optionally supported 8K display monitor output up to 40Gbps data rate supports maximum 5V/3A portable charging power output when AC power is connected.
Security Intel® vPro™ Technology (optional) • Intel® vPro™ Technology offers an added layer of IT security with a complete set of hardware-based security measures. Such as Remote manageability by Intel® Active Management Technology, data security and encryption through Intel® Trusted Execution Technology, IT policies of businesses can be well-tailored, managed and applied to wherever appropriate with vPro PCs. • To find out more, see official Intel® vPro™ website.
Introductions 2-20
How to Get Started
How to Get Started Begin to Use the Notebook For a new user of this notebook, we would like to suggest you follow the illustrations below to begin to use the notebook.
How to Use the Notebook Comfortably If you are a beginner to the notebook, please read the following instructions to assure your own safety, and make yourself comfortable during the operations. ▶▶ Good illumination is essential in the work area. ▶▶ Choose a chair and desk with good ergonomics and adjust their heights according to your posture. ▶▶ Adjust the backrest to support your lower back comfortably when you are sitting upright. ▶▶ Place your feet flat on the floor with your knees bent to a 90 degrees.
How to Get Started How to Manage Power Supply This section provides users basic safety precautions to take when using an AC/DC adapter and battery power properly. AC/DC Adapter Ensure that your notebook is connected to an AC power source via the AC adapter before turning it on for the first time. If the notebook automatically shuts down due to low battery power, it is likely to cause system failure. Below are some Dos and Don'ts of an AC/DC adapter.
• Turn off the system if you won’t be using it for a period of time. • Disable unnecessary settings or remove idle peripherals. • Connect an AC/DC adapter to the system whenever possible. ▶▶ How to charge the battery properly Please pay attention to the following tips before recharging the battery: • If a charged battery pack is not available, save your work and close all running programs and shut down the system. • Plug in an AC/DC adapter.
How to Get Started How to Set Up a Power Plan in Windows 10 A power plan is a collection of hardware and system settings that manages how your computer uses and conserves power. Power plans can save energy, maximize system performance, or balance energy conservation with performance. The default power plans — Balanced and Power saver — meet most people's needs. But you can modify settings for existing plans or create your own plan. Choose or Customize a Power Plan 1.
3-7
How to Get Started Create Your Own Power Plan You are allowed to create your own Power Plan and customize it to meet personal requirements. 1. Click [Create a power plan] in Power Options. 2. Select an existing plan that meets your needs most, and give the new power plan a name. Click [Next] to continue. 3. Change the settings for the plan. Click [Create] to make the customized power plan taking effect. 4. Now you have a new power plan that is automatically set as active.
3-9
How to Get Started How to Set Up Windows Hello Fingerprint Login (optional) Windows Hello is a more secure, personal way to get instant access to your Windows 10 devices using fingerprint or facial recognition. The feature requires fingerprint reader or a infrared camera that supports it. Once you’re set up, you’ll be able to sign in with a quick swipe or glance. Follow below instructions to login with a touch. You need to set up a password and PIN code before you're allowed to use Windows.
3-11
How to Get Started Set up a PIN 1. In Sign-in options, click [Windows Hello PIN]. 2. Click [Add] to continue. 3. You may be asked to verify in your account with the password. Set up a PIN and then re-enter to confirm, click [OK] to close.
Set up a Fingerprint 1. In Sign-in options, click [Windows Hello Fingerprint]. 2. Click [Set up]. 3. Follow the Windows Hello setup wizards; click [Get started] button. 4. Place your preferred finger on the upper-left corner of the touchpad. You will be asked swipe the same finger for a few times to setup Windows Hello. 5. Click [Add Another] if you want to repeat the process with another finger, or close the program.
How to Get Started 3-14
How to Set Up Windows Hello Face Login (optional) Windows Hello is a more secure, personal way to get instant access to your Windows 10 devices using fingerprint or facial recognition. The feature requires fingerprint reader or a infrared camera that supports it. Once you’re set up, you’ll be able to sign in with a quick swipe or glance. Follow the instructions as below to login with a look. You need to set up a password and PIN code before you're allowed to use Windows. Create a Password 1.
How to Get Started 3-16
Set up a PIN 1. In Sign-in options, click [Windows Hello PIN]. 2. Click [Add] to continue. 3. You may be asked to verify in your account with the password. Set up a PIN and then re-enter to confirm, click [OK] to close.
How to Get Started Set up a Facial Login with IR Camera 1. In Sign-in options, click the [Set up] button under [Windows Hello Face]. 2. Follow the Windows Hello setup wizards; Click [Get started] button. 3. Position your face in the center of the frame that appears on screen. The camera will register your face. 4. Complete the setup. If you wore glasses while setting up face recognition, click [Improve recognition] to go through the setup again without them.
3-19
How to Get Started How to Use the Touchpad The touchpad integrated in your notebook is a pointing device that is compatible with standard mouse, allowing you to control the notebook by pointing the location of the cursor on the screen. ▶▶ Configure the Touchpad You can customize the pointing device to meet your personal needs. For example, if you are a left-handed user, you may want to swap the functions of the two buttons.
▶▶ Point and Click When you have moved and placed the cursor over an icon, a menu item or a command that you want to execute, simply tap slightly on the touchpad or press the left button to select. This procedure, called as point and click is the basics of operating your notebook. Unlike the traditional pointing device such as the mouse, the whole touchpad can act as a left button, so that your each tap on the touchpad is equivalent to pressing the left button.
How to Get Started How to Connect the Internet Wireless LAN Wireless LAN is a wireless broadband connection that allows you to connect to the Internet without using any cables. Follow the instructions as below to set up a Wireless LAN connection. 1. Open up Settings, find and click [Network & Internet]. 2. Select [Wi-Fi] within the Network & Internet selection menu. 3. Switch [ON] the Wi-Fi function if it is set to [Off]. 4. Select [Show available networks] to open up the network selection table.
3-23
How to Get Started Wired LAN Using cables and network adapters to connect to the Internet. Before setting up the connection of Dynamic IP/PPPoE or Broadband (PPPoE) or Static IP, contact your Internet Service Provider (ISP) or network administrator for assistance of setting up Internet connection. ▶▶ Dynamic IP/PPPoE Connection 1. Open up Settings, find and click [Network & Internet]. 2. Select [Ethernet] within the Network & Internet selection menu. 3.
3-25
How to Get Started 3-26
▶▶ Broadband (PPPoE) Connection 1. Open up Settings, find and click [Network & Internet]. 2. Select [Ethernet] within the Network & Internet selection menu. 3. Select [Network and Sharing Center] to bring out Network and Sharing Center window. 4. Select [Set up a new connection or network] under [Change your networking settings]. 5. Select [Connect to the Internet] under [Choose a connection option], and then click [Next]. 6. Click [Broadband (PPPoE)]. 7.
How to Get Started 3-28
How to Set Up Bluetooth Connection Bluetooth pairing is a process in which two Bluetooth devices communicate with each other through an established connection. Activating Bluetooth Connection ▶▶ Checking the Bluetooth status Before setting up a Bluetooth connection, it is a must to make sure that Airplane mode is turned off. 1. Open up Settings, find and click [Devices]. 2. Select [Bluetooth & other devices] within the Devices selection menu. 3.
How to Get Started 3-30
3-31
How to Get Started How to Connect External Devices This notebook may be equipped with various connecting I/O (input/output) ports, such as USB, HDMI, DisplayPort, and mini DisplayPort. Users will be able to connect diverse peripheral devices to the notebook. To connect these devices, refer to the instruction manuals of each device first, and then connect the device to the notebook.
Video: How to Use RAID Function (optional) This notebook may support RAID function of different levels. RAID allows users to store data on multiple hard disk drives or solid state drives. Contact the local dealer for further and correct information and be noted that the supported RAID functions may vary depending on the models users purchased. Watch the instruction video at: https://youtu.
How to Get Started How to Select Boot Mode in BIOS 1. Power on the system. As soon as the first logo screen appears, press the DEL key immediately and enter the BIOS menu. 2. Move the cursor to [Boot] tab, and select [Boot mode select] in Boot Configuration. 3. For operating system supports UEFI-based BIOS (Windows 10), it is suggested to select [UEFI]. 4. Refer to MSI FAQ for further information about installing Windows operating system on the notebook at https://www.msi.
Video: How to Restore Windows 10 Operating System on MSI Notebooks Watch the instruction video at: https://www.youtube.com/watch?v=hSrK6xAQooU, to restore the Windows 10 operating system by using [F3 Recovery] and [Windows 10 Settings] when it is needed.
How to Get Started Video: How to Use MSI One Touch Install MSI "One Touch Install", the one-click installer application, allows users to efficiently install all needed drivers on MSI notebooks with single click. Watch the instruction video at: Windows 10: https://www.youtube.
3-37
MSI.
