Notebook User's Manual Preface 1
Content 1 Preface................................................................................................1-1 Regulations and Statements.........................................................................................1-4 FCC-B Radio Frequency Interference Statement...................................................1-4 FCC Conditions..........................................................................................................1-4 CE Conformity.......................................
How to Set Up Power Plan in Windows........................................................................3-6 How to Use the Keyboard..............................................................................................3-8 Windows Key..............................................................................................................3-8 Switch Display............................................................................................................3-8 Disable or Enable Touchpad ..
Regulations and Statements FCC-B Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Battery Regulations 廢電池請回收 Taiwan: For better environmental protection, waste batteries should be collected separately for recycling or special disposal. California, USA: The button cell battery may contain perchlorate material and requires special handling when recycled or disposed of in California. For further information please visit: http://www.dtsc.ca.gov/hazardouswaste/ perchlorate/ Safety Guideline for Using Lithium Battery Danger of explosion if battery is incorrectly replaced.
Japan JIS C 0950 Material Declaration A Japanese regulatory requirement, defined by specification JIS C 0950, mandates that manufacturers provide material declarations for certain categories of electronic products offered for sale after July 1, 2006. http://www.msi.com/html/popup/csr/cemm_jp.html http://tw.msi.com/html/popup/csr_tw/cemm_jp.
Safety Instructions Read the safety instructions carefully and thoroughly. All cautions and warnings on the equipment or user’s manual should be noted. Lay this equipment on a stable surface before setting it up. The openings on the enclosure are used for air convection and to prevent the equipment from overheating. Do not cover the openings. • Do not leave the equipment in an unconditioned environment with a storage temperature above 60ºC (140ºF) or below 0ºC (32ºF), which may damage the equipment.
• To prevent explosion caused by improper battery replacement, use the same or equivalent type of battery recommended by the manufacturer only. • Always keep the battery in a safe place. When installing the coaxial cable to the TV Tuner, it is necessary to ensure that the metal shield is reliable connected to protective earthing system of the building. Never pour liquid into the opening that could damage the equipment or cause an electrical shock.
MSI Highlights Explore more about MSI highlights at http://www.msi.com and https://www.youtube.com/user/MSIGamingGlobal Refer to the Notebook Software Application Manual for detailed instructions. MSI collaborates with SteelSeries to develop an exclusive SteelSeries Engine in gaming notebooks. SteelSeries Engine is the Apps to combine all frequent functions for gamers in multiple devices management.
Trademarks ▶▶ All trademarks are the properties of their respective owners. ▶▶ THX and THX TruStudio Pro are trademarks of THX Ltd. which may be registered in some jurisdictions. All rights reserved. ▶▶ Sound Blaster® is registered trademark of Creative Technology Ltd. Revision History ▶▶ Version: 1.
Notebook User's Manual Introductions 2
Congratulations on becoming an user of this notebook, the finely designed notebook. You will have a delightful and professional experience in using this exquisite notebook. We are proud to tell users that this notebook is thoroughly tested and certified by our reputation for unsurpassed dependability and customer satisfaction. Manual Map This User’s Manual provides instructions and illustrations on how to operate this notebook. It is recommended to read this manual carefully before using this notebook.
Product Overview This section provides the description of basic aspects of the notebook. It will help you to know more about the appearance of this notebook before using it. Please be aware that the figures shown here are for reference only. The figure of top-open view and description shown below will lead you to browse the main operating area of your notebook.
1. Webcam/ Webcam LED/ Internal Microphone • This built-in webcam can be used for picture taking, video recording or conferencing, and any other interactive applications. • Webcam LED indicator, next to the webcam, glows when webcam function is activated; LED goes out when this function is turned off. • The built-in microphone and its function is the same with microphone. 2. Power Button / Power LED / GPU Mode LED Power Button • Use this button to turn the notebook power ON and OFF.
+ Webcam + Airplane mode + True Color + True Color Selections • Press and hold the Fn key, and then press the F7 key to switch among Sport / Comfort / Green modes and shift the performance. • This function will only be activated when AC Power is plugged-in, and the default setting is Sport mode. • Press and hold the Fn key, and then press the F10 key repeatedly to turn Airplane mode on or off recurrently.
Front Side View 1. Status LED Sleep State • LED blinks when the system is in Sleep state. • LED goes out when the system is turned off. Drive Activity Indicator LED blinks when the system is accessing the internal storage drives. Num Lock: LED glows when the Num Lock function is activated. Caps Lock: LED glows when the Caps Lock function is activated. Bluetooth (optional) • LED glows when Bluetooth function is enabled. • LED goes out when this function is disabled.
Battery Status 2-7 Introductions • LED glows when the battery is being charged. • Continuously blinking if the battery fails and it is recommended to replace a new battery. • Consult the local dealer for purchasing an equivalent type of battery recommended by the manufacturer. • Battery LED goes out when it is fully charged or when the AC/DC adapter is disconnected.
Right Side View 1. USB 3.0 Port/ Super Charger USB Port USB 3.0, the SuperSpeed USB, delivers the higher interface speeds for connecting various devices, such as storage devices, hard drives, or video cameras, and offers more advantages over high-speed data transferring. Super Charger USB port provides faster power charging function for Apple devices when the notebook is in power off mode. 2.
6. Battery Reset Hole Whenever the system firmware (EC) is upgraded or the system hangs, please 1) power off the notebook; 2) connect the AC power; 3) use a straightened paperclip to insert this hole and reset the notebook; 4) power on the notebook. 7. Ventilator 2-9 Introductions The ventilator is designed to cool the system. DO NOT block the ventilator for air circulation.
Left Side View 1. Ventilator The ventilator is designed to cool the system. DO NOT block the ventilator for air circulation. 2. Power Connector This connector is to connect the AC/DC adapter and supply power for the notebook. 3. Audio Port Connectors Make high quality sound blaster with stereo system and Hi-Fi function supported. Microphone Used for an external microphone. Headphone A connector for speakers or headphones. 4.
Rear Side View Introductions 1. Ventilator The ventilator is designed to cool the system. DO NOT block the ventilator for air circulation.
Bottom Side View 1. Ventilator The ventilator is designed to cool the system. DO NOT block the ventilator for air circulation.
Specifications The specification may change without notice. The actual products sold are different from areas. Please check the detailed specification with your local dealers. Dimension 390 (W) x 266 (D) x 20.05 (H) mm Weight 2.
Storage (items listed here may very without notice) HDD form factor 2.5" HDD SSD (optional) M.2 SSD I/O Port USB x 3 (version 3.0) Mic-in x1 Headphone-out x 1 (S/PDIF-Out supported) RJ45 x1 HDMI x1 Mini-DisplayPort x1 Card Reader x 1 (SD/ MMC) The supported memory cards may vary without notice. Communication Port LAN 10/ 100/ 1000Mb Ethernet Wireless LAN Supported Bluetooth Supported Display LCD Type (optional) 15.
HDMI output Supported DisplayPort output Supported Multi-Display Function Supported FHD CMOS Camera Supported Audio Internal Speaker 4 speakers Sound Volume Adjusted by keyboard hot-key and switches.
Notebook User's Manual 2-16
Notebook User's Manual How To Get Started 3
Begin to Use the Notebook For a new user of this notebook, we would like to suggest you follow the illustrations below to begin to use the notebook.
How to Use the Notebook Safely If you are a beginner to the notebook, please read the following instructions to assure your own safety, and make yourself comfortable during the operations. ▶▶ Your work area should have enough illumination. ▶▶ Adjust the backrest to support your lower back comfortably when you are sitting upright. ▶▶ Place your feet flat on the floor with your knees bent to a 90 degrees. ▶▶ Adjust the angle/position of the LCD panel to have an optimal view.
How to Manage Power Supply This section provides users basic safety precautions to take when using an AC/DC adapter and battery power properly. AC/DC Adapter To safely and properly power on a notebook, it is strongly recommended to connect the supplied power adapter before turning it on for the first time. Below are some Do's and Don'ts of an AC/DC adapter. ▶▶ DOs • Use the adapter that shipped with your notebook only. • Always be aware of heat coming from the in use AC/DC adapter.
▶▶ Charging the Battery Pack The battery pack can be recharged while it is installed in the notebook. Please pay attention to the following tips before recharging the battery: 3-5 How To Get Started • If a charged battery pack is not available, save your work and close all running programs and shut down the system. • Plug in an external AC/DC adapter. • You can use the system, suspend system operation or shut down and turn off the system without interrupting the charging process.
How to Set Up Power Plan in Windows Below steps show you how to save battery power for your notebook by using a power-saving plan. Follow the instructions below to adjust the power management settings in Windows OS: Power Options in Windows OS allows you to control the power management features of your display, hard drive, and battery. 1. Drag the mouse cursor to the left corner of the screen and [Start] icon will show up. Right click the icon to show selection menu. Select [Control Panel] in the menu. 2.
How To Get Started 3-7
How to Use the Keyboard This notebook provides a full functioned keyboard. To ensure that the keyboard will be functional properly, it is recommended to have the SCM application installed in your operating system. Windows Key You can find the Windws Logo key on the keyboard which is used to perform Windows-specific functions, such as opening the Start menu and launching the shortcut menu. Switch Display + Switch the display output mode between the LCD, external monitor and both.
Enter Sleep Mode Adjust the Brightness Levels of the Display + + Increase the LCD brightness. Decrease the LCD brightness. Adjust the Sound Levels of the Speakers + + + Increase the built-in speaker’s volume. Decrease the built-in speaker’s volume. Mute the built-in speakers. 3-9 How To Get Started + Force the computer into sleep state (depending on the system configuration). Press the Power button to wake up the system from sleep state.
Adjust the Brightness Levels of the Keyboard Backlight LEDs + Increase the brightness level of the keyboard backlight LEDs. Decrease the brightness level of the keyboard backlight LEDs. + Quick Launch Keys Use the [Fn] combination keys on the keyboard to activate the specific applications or tools. With the help of these keys, users will be able to do work more efficiently.
+ True Color + True Color Selections • This notebook may be pre-installed the True Color application. With this application, users can select various color settings for the best viewing experience. • Press and hold the Fn key, and then press the Z key to launch the True Color application. • Press and hold the Fn key, and then press the A key to change different view modes.
What is Touchpad The touchpad integrated in your notebook is a pointing device that is compatible with standard mouse, allowing you to control the notebook by pointing the location of the cursor on the screen. ▶▶ Configuring the Touchpad You can customize the pointing device to meet your personal needs. For example, if you are a left-handed user, you may want to swap the functions of the two buttons.
▶▶ Point and Click ▶▶ Drag and Drop You can move files or objects in your notebook by using drag-and-drop. To do so, place the cursor on the desired item and slightly tap twice on the touchpad, and then keep your fingertip in contact with the touchpad on the second tap. Now, you can drag the selected item to the desired location by moving your finger on the touchpad, and then lift your finger from the touchpad to drop the item into place.
How to Connect the Internet Wireless LAN Wireless LAN is a wireless broadband connection that allows you to connect to the internet without using any cables. Please follow the instructions below to set up a Wireless LAN connection. ▶▶ Turning Airplane mode off For flight safety consideration, it is always recommended to turn Airplane mode on when you are in flight. When Airplane mode is enabled, Wireless LAN connection and Bluetooth will be turned off.
▶▶ Setup Wireless LAN 1. Unfold the setting menu by pointing the mouse to the lower-right corner of the desktop and clicking it. 2. Click the [Wireless LAN] icon. 4. A security key will be required for connecting the selected network. Then click [Next]. 3-15 How To Get Started 3. Select a Wireless LAN connection from the network list.
Wired LAN Using cables and network adapters to connect to the internet. ▶▶ Setup Dynamic IP/PPPoE connection Go to the desktop (Please launch Desktop if you are in Win 8 Start screen) 1. Point your mouse cursor to the LAN icon in the taskbar, and then right click to select [Open Network and Sharing Center]. 2. Choose [Change adapter settings]. 3. Right click on [Ethernet] to select [Properties] from the drop-down menu. 4.
7. Choose [Connect to the Internet], and then click [Next]. 8. Click [Broadband (PPPoE)]. 9. Fills User name, Password, and Connection name fields. Then click [Connect]. 3-17 How To Get Started 6. Repeat step 1 to launch [Network and Sharing Center] again. Select [Set up a new connection or network] under [Change your networking settings].
Notebook User's Manual 3-18
▶▶ Setup a static IP internet connection 1. Follow the previous steps 1 to 4 in [Setup Dynamic IP/PPPoE Connection]. 2. Select [General] tab and click [Use the following IP address] and [Use the following DNS server addresses]. You will be asked to enter the IP address, Subnet mask, and Default gateway into the empty place , then click [OK].
How to Set Up Bluetooth Connection Bluetooth pairing is a process in which two Bluetooth enabled devices communicate with each other through an established connection. Activating Bluetooth Connection ▶▶ Turning Airplane mode off Refer to the previous Wireless LAN section to turn Airplane mode off before activating Bluetooth connection. ▶▶ Pairing Bluetooth devices Go to the desktop. (Please launch Desktop if you are in Win 8 Start screen.) 1.
3. Click "PC and devices" from the PC settings list. 4. Choose a desired Bluetooth device from the connection list, and then click [Pair] to continue. 5. Match the passcode between the notebook and the selected Bluetooth device, click [yes] to finish.
How to Connect External Devices This notebook may equipped with various connecting I/O (input/output) ports, such as USB, HDMI, DisplayPort, and mini DisplayPort. Users will be able to connect diverse peripheral devices to the notebook. To connect these devices, refer to the instruction manuals of each device first, and then connect the device to the notebook.
How to Use Multiple Monitors If users connect an additional monitor to the notebook, the system will automatically detect the external monitor connected. Users will be allowed to customize the display settings. 2. Press and hold the Windows key, and then press [P] key to bring up [Display Settings]. 3. Select a desired mode ▶▶ PC screen only: shows the desktop on the monitor of the notebook only. ▶▶ Duplicate: the desktop will be displayed on the monitor of the notebook and the external monitor connected.
How to Use RAID Function This notebook may support RAID technology of different levels. RAID allows users to store data on multiple hard disk drives or solid-state drives. Contact the local dealer for further and correct information and be noted that the supported RAID functions may vary depending on the models users purchased. To set up RAID, follow the instructions below: 1. Create a recovery disk with the Recovery Image Backup Tool that comes with the package of the notebook.
How to Select Boot Mode in BIOS while installing OS 1. Power on the system. As soon as the first logo screen appears, press the DEL key immediately and enter the BIOS menu. 3. For operating systems support UEFI-based BIOS (Windows 8 and Windows 8.1), it is suggested to select [UEFI]. 4. For Windows 7 or previous versions of Windows, select [Legacy] mode. 3-25 How To Get Started 2. Move the cursor to [Boot] tab, and select [Boot mode select] in Boot Configuration.
Where Are Key Components In this section you will find information about main parts inside a notebook, some may be upgradable or replaceable depending on the model purchased. Don't try to upgrade your device yourself as unauthorized replacements may void your warranty. To obtain service, please contact a local authorized service center. 1. HDD 2. Memory 3. M.2 SSD 4.
