Specifications

Using BIOS

Press <Esc> to return to the Advanced Features page.

Hardware Monitor (Press Enter)

Scroll to this item and press <Enter> to view the following screen:

These items allow end users and technicians to monitor data provided by the BIOS on

this motherboard. You cannot make changes to these fields.

• CPU Temperature

• CPU Fan Speed

• System Fan Speed

Parallel Port (Enabled)

This item enables the parallel port.

Mode (ECP)

This item helps to select the mode of the parallel port. If ECP mode is selected, DMA3

is used.

Base I/O Address (378)

This item helps to select the base I/O address for the parallel port.

Interrupt (IRQ7)

This item helps to select the IRQ for the parallel port.

Onboard Audio (Auto)

This field should be displayed only when an onborad audio codec (AC’97 or HD Audio) is

present.Options: Disabled, Enabled, Auto.

Press <Esc> to return to the Advanced Features page.

I/O Device Configuration (Press Enter)

Scroll to this item and press <Enter> to view the following screen:

CPU Type

This item shows the type of CPU installed in your system.

CPU Speed

This item decides CPU speed installed in your system.

CPU Cache RAM (1024K)

This item shows the total L2 Cache size that you installed. The cache size will vary

according to different CPUs you installed.

PS/2 Mouse (Auto Detect)

Use this item to enable, disable or auto detect PS/2 mouse.

CPU Temperature :39°C/102°F

CPU Fan Speed : 1163 RPM:

System Fan Speed : N/A

Advanced

↔

Select Screen

Selecct Item

F1 General Help

F5 Load Defaults

F10 Save and Exit

ESC Exit