Specifications

1
Introducing the Motherboard
Chapter 1
Introducing the Motherboard
Introduction
Thank you for choosing the RC410-M motherboard. This motherboard is a high perfor-
mance, enhanced function motherboard that supports LGA775 P4/Celeron D CPUs for
high-end business or personal desktop markets.
The motherboard incorporates the RC410 Northbridge (NB) and SB450 Southbridge (SB)
chipsets. The RC410 is a sixth generation Intergrated Graphics Processor (IGP) that inte-
grates 3D/2D graphics and a system controller in a single chip. The momory controller
supports DDR2 SDRAM interface of DDR2 533/400MHz, with up to maximum memory
size of 2 GB. One PCI Express x16 slot, intended for Graphics Interface, is fully compliant
to the PCI Express Base Specification revision 1.0a.
The SB450 Southbridge supports three PCI slots which are PCI 2.3 compliant. The SB450
supports an EHCI compliant interface that provides 480Mb/s bandwidth for eight USB 2.0
ports (rear panel x 4, header x 4). Two onboard IDE connectors supports 4 IDE devices in
Ultra DMA 133/100/66/33 modes. The Southbridge integrates a Serial ATA host controller
that is SATA v1.0 compliant, supporting four SATA ports with maximum transfer rate up to
150 MB/s each.
The RC410-M motherboard is equipped with advanced full set of I/O ports in the rear panel,
including PS/2 mouse and keyboard connectors, LPT port, one SPDIFO port, one S_VEDIO
port, VGA port, four USB ports, one optional LAN port, one optional 1394a port (another
1394a header onboard), and audio jacks for microphone, line-in and 8-channel line-out.