Specifications

ManualsBrandsMSI ManualsComputer equipmentRC410M-LA

Introducing the Motherboard

Feature

• Accommodates Intel P4/Celeron D processors

• Supports Front Side Bus (FSB) speeds of 800/533 MHz

• Supports “Hyper-Threading” technology CPU

The RC410 Northbridge (NB) and SB450 Southbridge (SB) chipsets are based on an

innovative and scalable architecture with proven reliability and performance.

RC410 (NB)

• 64-bit single-channel DDR2 SDRAM interface

• One PCI Express x16 for Graphics Interface, fully compliant

to the PCI Express Base Specification revision 1.0a.

• Full support for 3D primitive, Direct3D texture lighting, and

OpenGL format for Indirect Vertices in Vertex Walker

• Full DirectX 9.0 support (Vertex Shader version 2.0 and

Pixel Shader version 2.0)

• SURROUNDVIEW

feature allows support for up to three

independent monitors

• TV Out display on a PAL or NTSC TV with S_VIDEO output

This motherboard uses an LGA775 type of Pentium 4 that carries the following fea-

tures:

Processor

Chipset

SB450 (SB)

• Compliant with PCI 2.3 specification at 33MHz

• Supports Four Serial ATA devices, compliant with Serial

ATA 1.0 specification which speeds up to 1.5GHz

• Integrated USB 2.0 Host Controller supporting up to eight

USB 2.0 ports

• Integrated IDE controller supports Ultra DMA 133/100/66/33

modes

• Intel HD Audio compliant, supporting 8-channel audio output

• Compliant with 64-bit single channel DDR2 SDRAM interface

• Supports 533/400 DDR2 SDRAM

• Accommodates two unbuffered DIMMs, up to 2 GB maximum memory size

Memor y

• 8 channels of DAC support 24/20/16-bit PCM format for 7.1 audio solution

• Supports 192K/96K/48K/44.1KHz DAC sample rate

• Power support: Digital: 3.3V; Analog: 3.5V~5.25V

• Meets Microsoft WHQL/WLP 2.x audio requirements

• Direct Sound 3D

compatible

• Dolby

Digital Encoder output for consumer electronic application

Audio

“Hyper-Threading” technology enables the operating system into thinking it’s hooked

up to two processors, allowing two threads to be run in parallel, both on separate

“logical” processors within the same physical processor.