Specifications

3
Introducing the Motherboard
Onboard LAN (Optional)
This motherboard supports the following LAN with following features:
• Power management
• Wake-up alarms
• CPU parameters
• CPU and memroy timing
Some hardware specifications and software items are subject to change
without prior notice.
BIOS Firmware
This motherboard uses AMI BIOS that enables users to configure many system
features including the following:
The firmware can also be used to set parameters for different processor clock speeds.
• Two PS/2 ports for mouse and keyboard
• One parallel port
• One VGA port
• One S_VEDIO port
• One SPDIFO port
• Four USB ports
• One 1394a port (optional)
• One LAN port (optional)
• Audio jacks for microphone, line-in and 8-channel High Definition audio
output
Integrated I/O
The motherboard has a full set of I/O ports and connectors:
The RC410-M motherboard supports UltraDMA bus mastering with transfer rates of
133/100/66/33 MB/s.
The motherboard comes with the following expansion options:
Expansion Options
• One PCI Express x16 for Graphic Interface
• Three 32-bit PCI v2.3 compliant slots
• Two 40-pin IDE connectors supporting up to 4 IDE devices
• One floppy disk drive interface
• Four 7-pin SATA connectors
• Supports 10Mb/s and 100Mb/s N-way Auto negotiation operation
• Supports PCI rev. 2.2, 32-bit, 66/33MHz
• Supports Full Duplex Flow Control (IEEE 802.3x)
• Supports Wake-on-LAN function and remote wake-up
1394a FireWire (Optional)
• Supports provisions of IEEE Std 1394-1995 standard for High-Performance
Serial Bus 1.0 and IEEE Std 1394a-2000
• Provides two 1394a fully compliant cable ports at 400/200/100 Mbit/s