User manual

9
4.1 Start-up and Log in
Activate your browser, and disable the proxy or add the IP address of this product into the exceptions. Then,
type this product’s IP address in the Location (for Netscape) or Address (for IE) field and press ENTER. For
example: http://192.168.1.254.
After the connection is established, you will see the web user interface of this product. To log in as an administrator,
enter the system password (the factory setting is ”admin”) in the Password field and click on the OK button. If
the password is correct, the web appearance will be changed into administrator configure mode. As listed in its main
menu, there are several options for system administration.
4.2 Wizard
Setup Wizard will guide you through a basic configuration procedure step by step.Press ”Next >”