Installation Guide

MAINTENANCE TIPS

Aswithanyooringmaterial,generalcleaningtechniquesofporcelainandceramictiledependonthe

surface,textureandconditionofthesurface.Waterandasoftspongewillusuallybeenoughtoclean

the surface of M S International ceramic and porcelain products.

If you clean with something other than water, however, opt for a neutral pH cleaner that will not affect

thenish.Youcanndneutralcleanersatmosthomecentersandtileshowrooms.Alwaystestthe

cleaneronasmallarearst.Iftileorstoneisheavilysoiled,werecommendthataprofessional

cleaning company determines the proper cleaning technique.

Page 2 of 2Porcelain Installation Guide

INSTALLATION

1. Begin laying the tile from the center of the room, using

your reference lines as your guide.

2. Spread thinset with the notched edge of a trowel. Larger

tiles require more thin set and a larger notched trowel.

3. As you lay your tile, you can use plastic spacers to help

 ensureyouhavestraightgroutlines.Youwillremovethe

spacers before the thinset dries.

4.Cleanupanyexcessthinsetimmediatelyusingthe

manufacturer’s instructions.

5. After a few rows of tile are installed, set them with a tile

level and a mallet.

6. As you reach the perimeter of the room, cut and adjust

tiles to complete your installation.

7. Allow the tile to set according to the manufacturer’s

instructions. Grout the tile.

8. Clean the tile surface with a damp sponge and

clean water.

1 2