Installation Guide

Installation of Mosaics Sheets

Tools and Equipments:

Substrate Preparation:

The substrates need to be clean, compact, perfectly at and free of dirt and cracks. Nylon or

wire brush can be used in cleaning the residues on the surface. If the brush cannot remove the

entire residue use bead blasting or sand blasting. Fix all the uneven area of the surface; leveling

compound might be needed to make the surface perfectly at. Small cracks can be xed using

crack suppression membrane or patch. Consult an engineer for an assessment of large cracks

because this might cause problem in the future.

Make sure enough time is given to let the substrate settle (as per manufacturers recommendation).

Do not install the mosaic tiles directly over plywood or drywall.

Diamond disc for

cutting mosaics

1/16 - 3/16 V

Notch Trowel

Grout Float

Level

Non-Sanded

Grout

Finish Nails

Sponge

Bucket