User`s manual

3-17
BIOS Setup
[Min Saving] Minimum Power Management. Suspend Mode=1 Hour
[Max Saving] Maximum Power Management. Suspend Mode=1 Min
[User Define] Allows end users to configure each mode separately.
Video Off Method
This setting determines the manner in which the monitor is blanked.
Video Off In Suspend
This option enables the monitor to be turned off during the suspend mode.
Suspend Type
This item allows you to select the suspend type for system power management.
Suspend Mode
After the selected period of system inactivity, all devices except the CPU shut
off.
HDD Power Down
If HDD activity is not detected for the length of time specified in this field, the
hard disk drive will be powered down while all other devices remain active.
Soft-Off by PWR-BTTNN
This feature allows users to configure the power button function. Settings are:
[Instant-Off] The power button functions as a normal power-on/-off button.
[Delay 4 Sec.]When you press the power button, the computer enters the
suspend/sleep mode, but if the button is pressed for more
than four seconds, the computer is turned off.
Wake-Up By PCI Card
When setting to [Enabled], this setting allows your system to be awakened from
the power saving modes through any event on PCI PME (Power Management
Event).
Resume By Alarm
When [Enabled], your can set the date and time at which the RTC (real-time
clock) alarm awakens the system from suspend mode.
Date (of Month) Alarm
When Resume By Alarm is set to [Enabled], the field specifies the month for
Resume By Alarm.
Time (hh:mm:ss) Alarm
You can choose what hour, minute and second the system will boot up.