User`s manual
3-19
BIOS Setup
VGA Palette Snoop
Bit Setting Action
Disabled Data read or written by the CPU is only directed to the PCI
VGA device’s palette registers.
Enabled Data read or written by the CPU is directed to both the PCI
VGA device’s palette registers and the ISA VGA device’s
palette registers, permitting the palette registers of both
VGA devices to be identical.
The setting must be set to [Enabled] if any ISA bus adapter in the system
requires VGA palette snooping.
** PCI Express Relative Items **
Maximum Payload Size
This setting sets the maximum TLP payload size for the PCI Express devices.
The unit is byte.
Post Delay
When expansion cards or other peripherals are installed, set this setting to [Enabled]
to enable longer POST delay for BIOS to detect these add-on resources.
CPU Clock Ratio
This setting controls the multiplier that is used to determine the internal clock speed of
the processor relative to the external or motherboard clock speed.