User`s manual

44 BIOS Setup
Boot Setting Configuration
Quick Boot
Enabling this setting will cause the BIOS power-on self test
routine to skip some of its tests during bootup for faster system
boot.
Quiet Boot
This BIOS feature determines if the BIOS should hide the nor-
mal POST messages with the motherboard or system manu-
facturer's fullscreen logo.
When it is enabled, the BIOS will display the full-screen logo
during the boot-up sequence, hiding normal POST messages.
When it is disabled, the BIOS will display the normal POST
messages, instead of the full-screen logo.
Please note that enabling this BIOS feature often adds 2-3 sec-
onds of delay to the booting sequence. This delay ensures that
the logo is displayed for a sufficient amount of time. Therefore,
it is recommended that you disable this BIOS feature for a
faster boot-up time.
AddOn ROM Display Mode
This item is used to determine the display mode when an
optional ROM is initialized during POST. When set to [Force
BIOS], the display mode used by AMI BIOS is used. Select
[Keep Current] if you want to use the display mode of optional
ROM.