User`s manual

Preface
About This Manual
This manual is written for professional system integrators and PC technicians.
It provides information for the installation and use of the SuperServer
6026TT-HT(R)F/HIBX(R)F/HIBQ(R)F. Installation and maintenance should be
performed by experienced technicians only.
The SuperServer 6026TT-HT(R)F/HIBX(R)F/HIBQ(R)F is a 2U Twin
2
(four
serverboards/nodes in a 2U chassis) rackmount server based on the SC827H-(R)1400B
server chassis and six serverboards (Super X8DTT-H(F)/HIBX(F)/HIBQ(F)) An
optional redundant power supply may be added to the system (indicated by the
"(R)" in the product name). The "(H)" in the product name indicates that the system
is cableless.
The main differences between the various serverboards, and the servers they are
in, is shown in the table below:
Model Variations (Differences between X8DTT-H models)
X8DTT-H /-HF /-HIBX /-HIBXF /-HIBQ /HIBQF
IPMI 2.0 w/ KVM
Over LAN
No Yes No Yes No Yes
Infi niBand
Connection
No No Yes Yes Yes Yes
DDR IB
No No Yes Yes No No
QDR IB
No No No No Yes Yes
Manual Organization
Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with the server
system and describes the main features of the Super X8DTT-H(F)/HIBX(F)/HIBQ(F)
serverboard and the SC827H-(R)1400B chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer
6026TT-HT(R)F/HIBX(R)F/HIBQ(R)F into a rack and check out the server
confi guration prior to powering up the system. If your server was ordered without
the processor and memory components, this chapter will refer you to the appropriate
sections of the manual for their installation.
iii
Preface