User`s manual

3-2

SUPERSERVER 6026TT-HT(R)F/HIBX(R)F/HIBQ(R)F USER'S MANUAL

3-3 Control Panel LEDs

In addition to the LEDs built into the power and UID buttons, each of the four control

panels located on the front of the SC827H-(R)1400B chassis has two LEDs that

provide you with critical information related their own node. This section explains

what each LED indicates when illuminated and any corrective action you may need

to take.

NIC

Indicates network activity on any of the LAN ports when ﬂ ashing

3-4 SATA Drive Carrier LEDs

Each SATA drive carrier has two LEDs.

• Green: When illuminated, the green LED on the front of the SATA drive carrier

indicates drive activity. A connection to the SATA backplane enables this LED

to blink on and off when that particular drive is being accessed.

• Red: There is no function associated with the red LED.

Alert

This LED is illuminated when an alert condition occurs. A solid red light indicates an

overheat condition in the system. A ﬂ ashing red light which ﬂ ashes in one second

intervals indicates a fan failure. A ﬂ ashing red light which ﬂ ashes in four second

interfals indicates a power failure. When notiﬁ ed of an alert, check the routing of

the cables and make sure all fans are present and operating normally. You should

also check to make sure that the chassis covers and air shrouds are installed.

Finally, verify that the heatsinks are installed properly. This LED will remain ﬂ ashing

or on as long as the temperature is too high or a fan does not function properly.