User`s manual

5-8
SUPERSERVER 6026TT-HT(R)F/HIBX(R)F/HIBQ(R)F USER'S MANUAL
1. Remove power from the system and
unplug the AC power cord from the
power supply.
2. Disconnect the heatsink fan wires
from the CPU fan header.
3. Using a screwdriver, loosen and
remove the heatsink screws from
the motherboard in the sequence as
show in the picture on the right.
4. Hold the heatsink as shown in
the picture on the right and gently
wriggle the heatsink to loosen
it from the CPU. (Do not use
excessive force when wriggling the
heatsink.)
5. Once the heatsink is loose, remove
it from the CPU socket.
6. To reinstall the CPU and the
heatsink, clean the surface of the
CPU and the heatsink to get rid of
the old thermal grease. Reapply the
proper amount of thermal grease on
the CPU surface before reinstalling
the heatsink.
Remove Screw #1
Remove Screw #2
Removing the Heatsink
Warning! We do not recommend that the CPU or the heatsink be removed. However,
if you do need to uninstall the heatsink, please follow the instructions below to prevent
damage to the CPU or the CPU socket.