User`s manual

5-12
SUPERSERVER 6026TT-HT(R)F/HIBX(R)F/HIBQ(R)F USER'S MANUAL
5-7 Adding PCI Cards
PCI Express Slot
The SuperServer 6026TT-HT(R)F/HIBX(R)F/HIBQ(R)F server includes four
preinstalled riser cards designed specifi cally for use in the SC827H-(R)1400B 2U
rackmount chassis (one card for each node). These riser cards support four low-
profi le PCI Express x16 cards to fi t inside the chassis.
PCI Card Installation
A riser card has already been preinstalled into each serverboard. Perform the
following steps to add a PCI add-on card:
1. Remove the PCI slot shield on the chassis by releasing the locking tab.
2. Insert the add-on card into the riser card.
3. Secure the add-on card with the locking tab.
Due to the memory allocation to system devices, the amount of memory that
remains available for operational use will be reduced when 4 GB of RAM is used.
The reduction in memory availability is disproportional. Refer to the table below.
Possible System Memory Allocation & Availability
System Device Size Physical Memory Remaining
(Available)
(3 GB Total System Memory)
Physical Memory Remaining
(Available)
(4 GB Total System Memory)
Firmware Hub
fl ash memory
(System BIOS)
1 MB 3.00 3.99
Local APIC 4 KB 3.00 3.99
Area Reserved
for the chipset
2 MB 3.00 3.99
I/O APIC (4
Kbytes)
4 KB 3.00 3.99
PCI Enumeration
Area 1
256 MB 3.00 3.76
PCI Express (256
MB)
256 MB 3.00 3.51
PCI Enumeration
Area 2 (if needed)
-Aligned on 256-
MB boundary-
512 MB 3.00 3.01
VGA Memory 16 MB 2.85 2.85
TSEG 1 MB 2.84 2.84
Memory available
to OS & other
applications
2.84 2.84