User`s manual
5-24
SUPERSERVER 6026TT-HT(R)F/HIBX(R)F/HIBQ(R)F USER'S MANUAL
Infi niBand Link LED (LEB1)
Indicator Settings
Color Status Defi nition
Green Solid Infi niBand: Connected
Off Off No connection
Infi niBand Activity LED (LEB2)
Indicator Settings
Color Status Defi nition
Yellow Solid Infi niBand: Active
Yellow Dim Infi niBand: Connected
Activity: Idle
Off Off No connection
Infi niBand LED Indicators (LEB1/
LEB2)
There are two LEDs associated with the
Infi niBand connection: LEB1and LEB2.
The green LED (LEB1) is the Infi niBand
Link LED and the yellow LED (LEB2)
indicates activity. Refer to the table on
the right for details.
Onboard Power LED
The LE1 LED is to indicate the system
power is on. Be sure to turn off the
system and unplug the power cord before
removing or installing components. See
the table at right for more information.
Onboard PWR LED (LE1)
Indicator Settings
LED Color Defi nition
Off System Off (PWR cable
not connected)
Green System On
Green:
Flashing
Quickly
ACPI S1 State
5-12 Serial ATA Connections
SATA Connector
(I-SATA0~5)
Pin Defi nitions
Pin# Defi nition
1 Ground
2 TX_P
3 TX_N
4 Ground
5 RX_N
6 RX_P
7 Ground
SATA Ports
There are six Serial_ATA ports on
the motherboard (I-SATA ports 0~5)
that support SATA 2.0 connections.
See the table on the right for pin
defi nitions.
Note: For more information on SATA RAID confi guration, please refer to the Intel
SATA HostRAID or LSI MegaRAID User's Guide posted on our Website @
http://
www.supermicro.com.