User`s manual

6-2
SUPERSERVER 6026TT-HT(R)F/HIBX(R)F/HIBQ(R)F USER'S MANUAL
6-2 Control Panel
Each control panel on the front of the chassis must be connected to the JF1
connector on its associated serverboard to provide you with system control buttons
and status indicators.
These wires have been bundled together in a ribbon cable to simplify the connection.
Pull all excess cabling out of the airfl ow path. The LEDs inform you of system status
for the serverboard it is connected to. See Chapter 3 for details on the LEDs and
the control panel buttons.
6-3 System Fans
The system has four hot-swappable 8-cm PWM fans to provide the cooling for all
four nodes. The fans connect directly to the backplane but receive their power from
the serverboard they are connected to logically. Fan speed may be controlled by a
setting in BIOS (see Chapter 7).
*The Infi niBand ports are included on the 6026TT-BIBX(R)F and 6026TT-BIBQ(R)F only.
**Redundant power is included on the 6026TT-BTRF/BIBXRF/BIBQRF models only.
Figure 6-2. Chassis Rear View
Figure 6-1. Chassis Front View
SATA Drives (12)Node A Control Panel
Node B Control Panel Node D Control Panel
Node C Control Panel
USB Ports
LAN Ports
Power Supply**PCI-Express x16 Slot
COM PortVGA Port Infi niBand Port*
Dedicated IPMI LAN Port