Owner's Manual

13
> Data Encryption
If Data Encryption is set to Required, the following items must
be answered. If it is set to Not required, you may skip Step 3
and click Next to close the 1-2-3 Setup Wizard.
> Authentication Type
- Open System: communicates the key across the network.
- Shared Key: devices must have identical WEP settings to
communicate.
Select your authentication type and continue on to the next item.
> Encryption Type
Select the level of encryption desired: 40-bit or 128-bit. If you
want to enable the encryption, for 40-bit key, enter 10 hexadecimal
digits; for 128-bit key, enter 26 hexadecimal digits.
> WEP Key
Enter your 10- or 26-digit WEP Key.
When completed, click Next to close the 1-2-3 Setup Wizard.
WEP Setting
Step 3. Setting the WEP
Step 3.
Hexadecimal digits
consist of the numbers
0-9 and the letters A-F.