Use and Care Manual

MSI SPC FLOATING LVT Care and Maintenance
MAINTENANCE:
Dust-mop or broom can be used for daily maintenance. When necessary, clean with a MOIST cloth or mop and a
neutral PH cleaner – heavy use of detergent cleaners will leave a residue and, over time, lead to a cloudy lm.
NEVER USE oor polish or oor cleaning wax, oil soaps, etc. These products can damage and/or leave a lm on
the ooring. This is not a defect in the oor.
TIPS:
• Always use felt tip protectors on all furniture legs/feet
• Entryway/walk off mats are recommended
WARNING:
• Never use rubber protective mats. - Area rugs are recommended
• Keep pet nails trimmed
• Sharp shoe-heels (e.g. high-heels) may dent the oors - Never slide furniture across a oor without pads
• Keep oors clean
Note - The suggestions mentioned above are for general practice. In case of a particular project, it is recommended that a
professional installer/fabricator/restorer is consulted. It is also recommend that cleaning solutions are tried in an isolated
area to check for desired results. MSI disclaims any liability towards the use of any care & maintenance products
.
Page 1
msisurfaces.com