User Manual

BIOS Setup

fRestore after AC Power Loss [Power Off]

Sets the system behaviors while encountering the AC power loss.

[Power Off] Leaves the system in power off state after restoring AC power.

[Power On] Boot up the system after restoring AC power.

[Last State] Restores the system to the previous state (power on/ power off)

before AC power loss.

fSystem Power Fault Protection [Disabled]

Enables or disables the system to boot up when detecting abnormal voltage input.

[Enabled] Protect the system from unexpected power operating and remain

the shut down status.

[Disabled] Disables this function.

f Windows OS Configuration

Sets Windows detailed conﬁguration and behaviors. Press Enter to enter the sub-

menu.

fBIOS UEFI/CSM Mode [CSM]

Select CSM (Compatibility Support Module) or UEFI mode to meet the system

requirement.

[CSM] For the non-UEFI driver add-on devices or non-UEFI mode OS.

[UEFI] For the UEFI driver add-on devices and UEFI mode OS.

fSecure Boot

Sets the Windows secure boot to prevent the unauthorized accessing. Press Enter

to enter the sub-menu. This sub-menu will appear when BIOS UEFI/CSM Mode

sets to UEFI.

f Wake Up Event Setup

Sets system wake up behaviors for different sleep modes. Press Enter to enter the

sub-menu.

fWake Up Event By [BIOS]

Selects the wake up event by BIOS or operating system.

[BIOS] Activates the following items, set wake up events of these items.

[OS] The wake up events will be defined by OS.

fResume By RTC Alarm [Disabled]

Disables or enables the system wake up by RTC Alarm.

[Enabled] Enables the system to boot up on a scheduled time/ date.

[Disabled] Disables this function.

fDate (of month) Alarm/ Time (hh:mm:ss) Alarm

Sets RTC alarm date/ Time. If Resume By RTC Alarm is set to [Enabled], the system

will automatically resume (boot up) on a speciﬁed date/hour/minute/second in

these ﬁelds (using the + and - keys to select the date & time settings).