Instruction Manual

2-8
BIOS Setup
SYS Fan1/ 2/ 3/ 4 Control
These tems allow user to select how much percentage of speed for the SYSFAN1/
2/ 3/ 4.
CPU/ System Temperature, CPU FAN/ SYS FAN 1/ 2/ 3/ 4 Speed
These tems show the current status of all of the montored hardware devces/
components such as CPU temperature/ system temperature and all fans’ speeds.
Power Management Setup
Press <Enter> to enter the sub-menu.
EuP 2013
Energy Usng Products Lot 6 2013 (EUP) reduces power consumpton when system
s o or n standby mode.
Note: When enabled, the system wll not support RTC wake up event functons.
Restore after AC Power Loss
Ths tem speces whether your system wll reboot after a power falure or nterrupt
occurs. Settngs are:
[Power Off] Always leaves the computer n the power off state.
[Power On] Always leaves the computer n the power on state.
[Last State] Restore the system to the status before power falure or nterrupt
occurred.
Wndows 8 Conguraton
Press <Enter> to enter the sub-menu.
Wndows 8 Feature
When enabled, the system wll swtch to the UEFI mode to meet the Wndows 8 logo
requrement. Before enablng ths eld, please make sure all nstalled devces &
utltes (hardware & software) meet the Wndows 8 system requrements.
MSI Fast Boot
Ths settng enables or dsables the MSI Fast Boot functon.
Fast Boot
When enabled, some tems wll be actvated and users can use these tems to set
the Wndows 8 fast boot events. “Fast Boot” wll only be avalable When "MSI Fast
Boot" s dsabled.
Wake Up Event Setup
Press <Enter> to enter the sub-menu.
Wake Up Event By
Settng to [BIOS] actvates the followng elds, and use the followng elds to set the
wake up events. Settng to [OS], the wake up events wll be dened by OS.
Resume By RTC Alarm
The eld s used to enable or dsable the feature of bootng up the system on a
scheduled tme/date.
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶