Preface X99A GAMING 9 ACK Motherboard G52-78821X8
Copyright Notice Preface The material in this document is the intellectual property of MICRO-STAR INTERNATIONAL. We take every care in the preparation of this document, but no guarantee is given as to the correctness of its contents. Our products are under continual improvement and we reserve the right to make changes without notice. Trademarks All trademarks in this manual are properties of their respective owners. ￭￭ MSI® is registered trademark of Micro-Star Int’l Co.,Ltd.
MSI+ is a smart web gadget that works as a shopping navigator and provides specs comparison for IT buyers. With a simple tap of the smartphone, you'll efficiently locate your ideal products from a wide variety of choices and, if product details are required, you may easily download user manuals within minutes. Better yet, the power calculator provides accurate estimates of power unit capacity for DIY users.
Safety Instructions ￭￭ Always read the safety instructions carefully. ￭￭ Keep this User’s Manual for future reference. Preface ￭￭ Keep this equipment away from humidity. ￭￭ Lay this equipment on a reliable flat surface before setting it up. ￭￭ The openings on the enclosure are for air convection hence protects the equipment from overheating. DO NOT COVER THE OPENINGS. ￭￭ Make sure the voltage of the power source is at 110/220V before connecting the equipment to the power inlet.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Radiation Exposure Statement Preface This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment and its antenna should be installed and operated with minimum distance 20 cm between the radiator and your body. This equipment and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.
Battery Information Batteries, battery packs, and accumulators should not be disposed of as unsorted household waste. Please use the public collection system to return, recycle, or treat them in compliance with the local regulations. Taiwan: For better environmental protection, waste batteries should be collected separately for recycling or special disposal.
WEEE (Waste Electrical and Electronic Equipment) Statement ENGLISH Preface To protect the global environment and as an environmentalist, MSI must remind you that...
ESPAÑOL Bajo la directiva 2002/96/EC de la Unión Europea en materia de desechos y/o equipos electrónicos, con fecha de rigor desde el 13 de agosto de 2005, los productos clasificados como “eléctricos y equipos electrónicos” no pueden ser depositados en los contenedores habituales de su municipio, los fabricantes de equipos electrónicos, están obligados a hacerse cargo de dichos productos al termino de su período de vida.
TÜRKÇE Çevreci özelliğiyle bilinen MSI dünyada çevreyi korumak için hatırlatır: Preface Avrupa Birliği (AB) Kararnamesi Elektrik ve Elektronik Malzeme Atığı, 2002/96/EC Kararnamesi altında 13 Ağustos 2005 tarihinden itibaren geçerli olmak üzere, elektrikli ve elektronik malzemeler diğer atıklar gibi çöpe atılamayacak ve bu elektonik cihazların üreticileri, cihazların kullanım süreleri bittikten sonra ürünleri geri toplamakla yükümlü olacaktır.
日本JIS C 0950材質宣言 日本工業規格JIS C 0950により、2006年7月1日以降に販売される特定分野の電気お よび電子機器について、製造者による含有物質の表示が義務付けられます。 Preface http://www.msi.com/html/popup/csr/cemm_jp.html http://tw.msi.com/html/popup/csr_tw/cemm_jp.html India RoHS This product complies with the “India E-waste (Management and Handling) Rule 2011” and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.
▍▍Contents Chapter 1 Getting Started ���������������������������������������������������������������������������1-1 Preface Packing Contents ������������������������������������������������������������������������������������������������� 1-2 Assembly Precautions ������������������������������������������������������������������������������������������ 1-3 Motherboard Specifications ���������������������������������������������������������������������������������� 1-4 Block Diagram �����������������������
FV1: V-Check Connectors ��������������������������������������������������������������������������� 1-31 Button ����������������������������������������������������������������������������������������������������������������� 1-32 POWER1: Power Button ������������������������������������������������������������������������������ 1-33 RESET1: Reset Button �������������������������������������������������������������������������������� 1-33 Jumper ��������������������������������������������������������������
Advanced ������������������������������������������������������������������������������������������������������� 3-8 Boot ������������������������������������������������������������������������������������������������������������� 3-13 Security �������������������������������������������������������������������������������������������������������� 3-14 Preface Save & Exit �������������������������������������������������������������������������������������������������� 3-15 OC ���������������������������
Chapter 1 Getting Started Thank you for choosing the X99A GAMING 9 ACK Series (MS-7882 v1.X) EATX motherboard. The X99A GAMING 9 ACK Series motherboards are based on Intel® X99 chipset for optimal system efficiency. Designed to fit the advanced Intel® LGA2011-3 processor, the X99A GAMING 9 ACK Series motherboards deliver a high performance and professional desktop platform solution.
Packing Contents Chapter 1 Motherboard Drivers & Utilities Disc Motherboard User Guide I/O Shield SATA Cable x6 Software & Application User Guide V-Check Cable x6 Audio Power Adapter M-Connector Antenna x2 Wi-Fi/Bluetooth module SLI Cable x2 eSATA Bracket eSATA Cable eSATA Power Cable IO Cover Case Badge Door Hanger * These pictures are for reference only and may vary without notice.
■■The components included in this package are prone to damage from electrostatic discharge (ESD). Please adhere to the following instructions to ensure successful computer assembly. ■■Always turn off the power supply and unplug the power cord from the power outlet before installing or removing any computer component. ■■Ensure that all components are securely connected. Loose connections may cause the computer to not recognize a component or fail to start.
Motherboard Specifications Chapter 1 CPU Support ■■Supports New Intel® Core™ i7 Processor Extreme Edition for LGA2011-3 Socket Chipset ■■Intel® X99 Express Chipset Memory Support ■■8x DDR4 memory slots supporting up to 128GB ■■Supports DDR4-2133/ 2200(OC)/ 2400(OC)/ 2600(OC)/ 2666(OC)/ 2750(OC) / 3000(OC)/ 3110(OC)/ 3333(OC) ■■Quad channel memory architecture ■■Supports non-ECC, un-buffered memory Expansion Slots ■■5x PCIe 3.
■■1x Killer E2205 Gigabit LAN controller* * The Killer Network Manager is only available for Windows 7/ 8/ 8.1 currently. The supported drivers for other operating systems would be available on the website if provided by vender. Wireless LAN ■■Killer Wireless 1525 module. -- Supports 2x2 802.11a/b/g/n/ac with advanced features -- Supports 20/ 40MHz at 2.4GHz and 20/ 40/ 80MHz at 5GHz Bluetooth ■■Killer Wireless 1525 module. -- Supports Bluetooth v4.
Chapter 1 Special Features ■■Streaming Engine ■■Audio Boost 2 ■■Military Class 4 ■■OC Genie 4 ■■CLICK BIOS 4 ■■NVIDIA SLI ■■AMD CrossFire ■■Easy Button ■■V-Check Points ■■Clear CMOS Button ■■Total Fan Control ■■Gaming Device Port ■■Super Charger ■■Smart Utilities ■■Wi-Fi ■■Bluetooth ■■Command Center ■■ECO Center Software ■■Drivers ■■MSI -- Command Center -- Live Update 6 -- Smart Utilities -- Super Charger -- Fast Boot -- MSI Gaming APP -- ECO Center ■■XSplit Gamecaster ■■Sound Blaster Cinema2 ■■Norton
Block Diagram Chapter 1 PCI Express 3.0 PCI Express 3.0 PCI Express 3.0 PCI Express 3.0 PCI Express 3.0 4 Channel DDR4 Memory Haswell-E Processor LGA2011-3 CPU Switch Switch x1 Streaming Engine x1 Killer E2205 Gigabit LAN PCI Express Bus Switch x4 PCI Express Bus 1 x M.2 10 x SATA 6Gb/s OR (2 ports reserved for SATA Express) x1 Switch PCI Express Bus 1 x SATA Express DMI 2.0 x2 x1 X99 PCH 6 x USB 3.0 Wi-Fi / Bluetooth VIA VL805 PCI Express Bus 6 x USB 2.
Connectors Quick Guide Wi-Fi/Bluetooth expansion module connector BIOS1 CPU JPWR2 CPUFAN2 OC_SWITCH6 JPWR3 DIMM1 DIMM2 DIMM3 DIMM4 DIMM8 CPUFAN1 DIMM7 DIMM6 DIMM5 Chapter 1 OC1 FV1 POWER1 RESET1 Back Panel JPWR1 SYSFAN3 JUSB3 PCI_E1 Streaming Engine SATA1_2 PCI_E2 SATA3_4 PCI_E3 SATA5_6_7_8 PCI_E4 M2_1 AUD_SW1 SATA9_10 PCI_E5 JCI1 JBAT1 SYSFAN2 JAUD2 JFP2 AUDPWR1 JFP1 SYSFAN1 JTPM1 JUSB2 JUSB1 SLOW_1 Getting Started 1-8 JUSB4
Port Name Port Type Page AUDPWR1 Direct Audio Power Connector 1-29 AUD_SW1 Audio Power Switch 1-36 Back panel 1-10 BIOS1 Multi-BIOS Switch 1-35 CPU LGA2011-3 Socket 1-12 CPUFAN1~2,SYSFAN1~3 Fan Power Connectors 1-25 DIMM1~8 Memory slots 1-16 FV1 V-Check Connectors 1-31 JAUD2 Front Panel Audio Connector 1-29 JBAT1 Clear CMOS Jumper 1-34 JCI1 Chassis Intrusion Connector 1-28 JFP1, JFP2 System Panel Connectors 1-26 JPWR1~3 ATX Power Connectors 1-20 JTPM1 TPM Module
Back Panel Quick Guide LAN Port PS/2 Port* Clear CMOS Button USB 3.0 Port USB 2.0 Port* CS-Out Line-In/ SS-Out USB 3.1 Port RS-Out Line-Out USB 3.0 Port USB 3.0 Port Chapter 1 * Gaming Device Port Optical MIC S/PDIF-Out ▶▶PS/2 Port A PS/2® DIN connector is for a PS/2® mouse/keyboard. ▶▶Clear CMOS Button There is CMOS RAM present on board that is powered by an external battery to store system configuration data.
LED LINK/ACT LED SPEED LED Link/ Activity LED Speed LED LED Status Description Off No link Yellow Linked Blinking Data activity Off 10 Mbps connection Green 100 Mbps connection Orange 1 Gbps connection ▶▶Optical S/PDIF-Out This S/PDIF (Sony & Philips Digital Interconnect Format) connector is provided for digital audio transmission to external speakers through an optical fiber cable. ▶▶Audio Ports These connectors are used for audio devices.
CPU (Central Processing Unit) Introduction to the LGA2011-3 CPU Chapter 1 The surface of the LGA2011-3 CPU has four alignment keys and a yellow triangle to assist in correctly lining up the CPU for motherboard placement. The yellow triangle is the Pin 1 indicator. Alignment Key Yellow triangle is the Pin 1 indicator Important Overheating Overheating can seriously damage the CPU and motherboard. Always make sure the cooling fans work properly to protect the CPU from overheating.
CPU & Heatsink Installation When installing a CPU, always remember to install a CPU heatsink. A CPU heatsink is necessary to prevent overheating and maintain system stability. Follow the steps below to ensure correct CPU and heatsink installation. Wrong installation can damage both the CPU and the motherboard. Video Demonstration 1. Open hinge lever. You can identify the hinge lever as below shown, it with a interlocking feature on the other end. 2. Open active lever.
5. Line up the CPU to fit the CPU socket. Be sure to hold the CPU by the base with the metal contacts facing downward. The alignment keys on the CPU will line up with the edges of the CPU socket to ensure a correct fit. 6. Carefully close the load plate and remove the plastic protective cap. Alignment Key Chapter 1 7. Close the active lever with a smooth uniform motion and latch to the socket. 8. Close the hinge lever with a smooth uniform motion and latch to the socket.
9. Evenly spread a thin layer of thermal paste (or thermal tape) on the top of the CPU. This will help in heat dissipation and prevent CPU overheating. 10. Locate the CPU fan connector on the motherboard. CPUFAN1 11. Place the heatsink on the motherboard with the fan’s wires facing towards the fan connector and the screws matching the holes on the socket. 12. Using a screwdriver tighten the four captive screws (9 inch-pounds). 13.
Memory These DIMM slots are used for installing memory modules. DIMM1 DIMM2 DIMM3 DIMM4 DIMM8 DIMM7 DIMM6 Chapter 1 DIMM5 Video Demonstration Watch the video to learn how to install memory. http://youtu.be/T03aDrJPyQs Up to Quad-Channel mode This motherboard supports up to four memory channels. Two DIMM slots provide a single channel. The memory modules can transmit and receive data with four data bus channels simultaneously to enhance system performance.
Suggestions for Multi-Channel mode population rule Dual-Channel mode Installed DIMMs (2 memory modules) Diagram DIMM1 DIMM2 DIMM3 DIMM4 DIMM1, DIMM5 Chapter 1 DIMM8 DIMM7 DIMM6 DIMM5 Triple-Channel mode Installed DIMMs (3 memory modules) Diagram DIMM1 DIMM2 DIMM3 DIMM4 DIMM1, DIMM3, DIMM5 DIMM8 DIMM7 DIMM6 DIMM5 Quad-Channel mode Installed DIMMs (4 memory modules) Diagram DIMM1 DIMM2 DIMM3 DIMM4 DIMM1, DIMM3, DIMM5, DIMM7 DIMM8 DIMM7 DIMM6 DIMM5 1-17 Getting Started
Quad-Channel mode Installed DIMMs (6 memory modules) Diagram DIMM1 DIMM2 DIMM3 DIMM4 DIMM1, DIMM2, DIMM3, DIMM5, DIMM6, DIMM7 DIMM8 DIMM7 DIMM6 DIMM5 Chapter 1 Installed DIMMs (8 memory modules) Diagram DIMM1 DIMM2 DIMM3 DIMM4 DIMM1, DIMM2, DIMM3, DIMM4, DIMM5, DIMM6, DIMM7, DIMM8 DIMM8 DIMM7 DIMM6 DIMM5 Important To ensure system stability for Dual/ Triple/ Quad channel mode, memory modules must be of the same type, number and density.
Mounting Screw Holes When installing the motherboard, first install the necessary mounting stands required for an motherboard on the mounting plate in your computer case. If there is an I/O back plate that came with the computer case, please replace it with the I/O backplate that came with the motherboard package. The I/O backplate should snap easily into the computer case without the need for any screws.
Power Supply Video Demonstration Watch the video to learn how to install power supply connectors. http://youtu.be/gkDYyR_83I4 JPWR1~3: ATX Power Connectors These connectors allow you to connect an ATX power supply. To connect the ATX power supply, align the power supply cable with the connector and firmly press the cable into the connector. If done correctly, the clip on the power cable should be hooked on the motherboard’s power connector. d n u d ro un nd .G ro u d 4 .G ro un 3 .G ro 2 .
Expansion Slots This motherboard contains numerous slots for expansion cards, such as discrete graphics or audio cards. PCI_E1~5: PCIe Expansion Slots The PCIe slot supports the PCIe interface expansion card. Chapter 1 PCIe 3.0 x16 Slot PCIe Bandwidth Table ■■3.0 = PCIe Gen 3.0 lanes, 2.0 = PCIe Gen 2.0 lanes Bandwidth 1-Way 2-Way 3-Way 4-Way CPU Type 40 lanes 28 lanes 40 lanes 28 lanes 40 lanes 28 lanes 40 lanes 28 lanes PCI_E1 3.0 x16 3.0 x16 3.0 x16 3.0 x16 3.0 x16 3.0 x8 3.
Video/ Graphics Cards If available, this motherboard takes advantage of the CPU’s integrate graphics processor, but discrete video cards can be installed by way of the motherboard’s expansion slots. Adding on one or more discrete video cards will significantly boost the system’s graphics performance. For best compatibility, MSI graphics cards are recommended. Video Demonstration Chapter 1 Watch the video to learn how to install a graphics card on PCIe x16 slot with butterfly lock. http://youtu.
Internal Connectors SATA1~10: SATA Connectors This connector is a high-speed SATA interface port. Each connector can connect to one SATA device. SATA devices include disk drives (HDD), solid state drives (SSD), and optical drives (CD/ DVD/ Blu-Ray). Video Demonstration SATA8 SATA6 SATA7 SATA5 SATA2 SATA4 SATA1 SATA3 SATA10 SATA9 ■■SATA1~6 support RAID 0, RAID 1, RAID 5 and RAID 10. ■■SATA7~10 ports only support IDE mode and AHCI mode.
SATA_EX1: SATA Express Connector The SATA Express, a new high performance storage interface, supports to connect 1 SATA Express device with up to 10 Gb/s transfer rate. Connects the SATA Express device to this 3-in-1 connector by a SATA Express cable. Chapter 1 SATA Express M2_1: M.2 Port The M.2 port supports either M.2 SATA 6Gb/s module or M.2 PCIe module. Video Demonstration Watch the video to learn how to install M.2 module. http://youtu.
CPUFAN1~2,SYSFAN1~3: Fan Power Connectors The fan power connectors support system cooling fans with +12V. If the motherboard has a System Hardware Monitor chipset on-board, you must use a specially designed fan with a speed sensor to take advantage of the CPU fan control. Remember to connect all system fans. Some system fans may not connect to the motherboard and will instead connect to the power supply directly. A system fan can be plugged into any available system fan connector.
JFP1, JFP2: System Panel Connectors These connectors connect to the front panel switches and LEDs. The JFP1 connector is compliant with the Intel® Front Panel I/O Connectivity Design Guide. When installing the front panel connectors, please use the optional M-Connector to simplify installation. Plug all the wires from the computer case into the M-Connector and then plug the M-Connector into the motherboard. Video Demonstration Watch the video to learn how to Install front panel connectors. http://youtu.
JUSB3~4: USB 3.0 Expansion Connectors The USB 3.0 port is backwards compatible with USB 2.0 devices. It supports data transfer rates up to 5Gbits/s (SuperSpeed). N D _ DP N r X _ D e R X _ P w _ o B3 _R _C _D .P S 3 d X C 1 .U B n T _ 2 .US rou 3_ TX 3 .G SB 3_ d 4 .U B n 0 5 US rou 2. 0 + . 6 .G SB 2. nd B 7 .U S u 8 .U ro 9 0.G 1 Important • Note that the VCC and GND pins must be connected correctly to avoid possible damage. • Please only connect one device per USB port to ensure stable charging.
JUSB1~2: USB 2.0 Expansion Connectors This connector is designed for connecting high-speed USB peripherals such as USB HDDs, digital cameras, MP3 players, printers, modems, and many others. d C un + .N o 1 0 r B 1 .G S B1 8 .U S C 6 U . 4 VC . 2 in P nd o u + .N ro B0 9 G 0 . 7 .US B S C 5 U . C 3 .V 1 Chapter 1 Important Note that the VCC and GND pins must be connected correctly to avoid possible damage. JCI1: Chassis Intrusion Connector This connector connects to the chassis intrusion switch cable.
JAUD2: Front Panel Audio Connector This connector allows you to connect the front audio panel located on your computer case. This connector is compliant with the Intel® Front Panel I/O Connectivity Design Guide. ct te e D e n o n h io P ct d e a e in et .H P D 0 o 1 .N IC d 8 M n . C 6 .N ou 4 Gr . 2 io L e D n o N h E R P _S ne d o a E h e NS P .H E d 9 .S ea R 7 .H IC L 5 .M IC 3 .M 1 This connector is used to provide direct power to back panel audio ports.
JTPM1: TPM Module Connector This connector connects to a TPM (Trusted Platform Module). Please refer to the TPM security platform manual for more details and usages. 3 in p 2 ta in a p 1 d ta pin 0 n e s & da ta pi m s & da ta a ra re s F d s & d C ad dre ss & P re s .L C d d s 3 P a d re 1 1.L C a dd et 1 .LP C a es k 9 .LP C R loc 7 .LP C C 5 .LP C 3 .LP 1 d n u d r ro un n r e .G ro Pi we Q r ow 4 1 2.G o Po IR we y p 1 .N V ial o b 0 1 .5 er P nd 8 .S 3V ta 6 .3. S 4 .
Voltage Checkpoints These voltage checkpoints are used to measure the current system voltages. A multimeter (not included) will be required to check voltages. FV1: V-Check Connectors To check the voltage, please use the optional voltage checkpoint cables included in the motherboard package. Attach the positive lead of the multimeter to the voltage checkpoint cable and the negative lead to the ground connector.
Button The motherboard has numerous on-board buttons to control various functions. This section will explain how to change your motherboard’s functions through the use of these on-board buttons. OC1: OC Genie Button This button is used to automatically overclock the system. To enable OC Genie, Set this button to ON while the system is in power off mode. On the next boot, the processor will be automatically overclock for optimal performance.
POWER1: Power Button Chapter 1 This button is used to turn-on and turn-off the system. Press the button once to turn-on or turn-off the system. RESET1: Reset Button This reset button is used to reset the system. Press the button to reset the system.
Jumper JBAT1: Clear CMOS Jumper There is CMOS RAM onboard that is external powered from a battery located on the motherboard to save system configuration data. With the CMOS RAM, the system can automatically boot into the operating system (OS) every time it is turned on. If you want to clear the system configuration, set the jumpers to clear the CMOS RAM. Chapter 1 1 Keep Data 1 Clear Data Important You can clear the CMOS RAM by shorting this jumper while the system is off.
Switch BIOS1: Multi-BIOS Switch This motherboard has two built-in BIOS ROMs (Labeled A and B, default BIOS ROM is A). If one is crashed, you can shift to the other for booting by sliding the switch. BIOS B Blue LED BIOS recovery with AFUDOS command When BIOS updating fails or causes the computer non-bootable, you can recover the failed BIOS by the steps below. Preparation: 1. Prepare a bootable USB flash drive. 2. Download the latest BIOS file from the MSI official website at www.msi.
OC_SWITCH6: OC Genie Mode Switch This swtich provides two overclocking modes (Gear 1 and Gear 2) for OC Genie operation. When you press the OC Genie button, the overclocking procedure will be performed according to the setting of this switch. The Gear 1 Mode is the default setting. The Gear 2 Mode allows the OC Genie function to overclock the CPU/ system frequency higher then Gear 1 Mode. Chapter 1 Blue LED Red LED Gear 1 (Default) Gear 2 Important • Gear 1 Mode: For normal users using original fan.
SLOW_1: Slow Mode Booting Switch Normal (Default) Enabled (Please enable this swtich during BIOS POST.) Important • Users will try extreme low temperature overclocking at their own risks. The overclocking results will vary according to the CPU version. • Please don’t switch to “Enabled” when power-off or the system will be un-bootable.
LED Status Indicators OC Switch Gear 1 LED OC Switch Gear 2 LED Chapter 1 Debug code LED BIOS A LED BIOS B LED LED Status Table The following table describes the status of LED indicators.
Debug Code LED Table Please refer to the table below to get more information about the Debug Code LED message.
Drivers and Utilities After you install the operating system you will need to install drivers to maximize the performance of the new computer you just built. MSI motherboard comes with a Driver Disc. Drivers allow the computer to utilize your motherboard more efficiently and take advantage of any special features we provide. You can protect your computer from viruses by installing the bundled security program. The bundle also includes a variety of powerful and creative utilities.
Chapter 1 You can also use the same method to install the utilities. For XSplit Gamecaster, you have to active the MSI premium license first. For more information, please visit http://event.msi.com/mb/2014/xsplit_activition/. After activating the XSplit Gamecaster, please note that “AverMedia H.264 Encoder” needs to be enabled for optimal system performance. Please follow the steps to enable “AverMedia H.264 Encoder”. 1. Press "XSplit Gamecaster" icon on the desk. 2. Click on the "Settings" tab.
3. Click on the button. Please note that, you have to enable "AverMedia H.264 Encoder" for both stream settings and record settings. Chapter 1 4. Select the desired resolution and then select the "AverMedia H.264 Encoder" by button. clicking on the Resolution selection Codec selection 5. Finally, click on the "CLOSE" button to finish it.
Chapter 2 Quick Installation This chapter provides demonstration diagrams about how to install your computer. Some of the installations also provide video demonstrations. Please link to the URL to watch it with the web browser on your phone or tablet. You may have even link to the URL by scanning the QR code. Important The diagrams in this chapter are for reference only and may vary from the product you purchased.
CPU Installation http://youtu.
8 9 10 Chapter 2 7 11 12 2-3 Quick Installation
Memory Installation http://youtu.
Motherboard Installation Chapter 2 1 2 2-5 Quick Installation
3 Chapter 2 Quick Installation 2-6
Power Connectors Installation http://youtu.
2 or 88 E6 SI M C4 M 88 E6 SI M C4 M 88 E6 SI M C4 M 88 E6 SI M C4 M 88 E6 SI M C4 M 88 E6 SI M C4 M Chapter 2 Quick Installation 2-8
SATA HDD Installation http://youtu.
M.2 module Installation http://youtu.
Front Panel Connector Installation JFP1 Connector Installation 88 E6 I MS 4 MC 88 E6 I MS 4 MC POWER SW POWER LED REST SW 88 E6 I MS 4 MC Front Panel Audio Connector Installation 88 E6 SI M C4 M 88 E6 SI M C4 M 8 E68 MSI MC4 8 E68 MSI MC4 88 E6 SI M C4 M 8 E68 MSI MC4 8 E68 MSI MC4 88 E6 SI M C4 M 2-11 Quick Installation Chapter 2 88 E6 I MS 4 MC 8 E68 MSI MC4 8 E68 MSI MC4 8 E68 MSI MC4 8 E68 MSI MC4 PWR_SWPWR_SW+ FP PWR/SLP FP PWR/SLP HD_LED+ HD_LEDRST_SWRST_SW+ RSVD_DNU HD_LED+ HD_LED
Peripheral Connector Installation USB2.0 Connector Installation or US B US 88 E6 SI M C4 M 88 E6 SI M C4 M Chapter 2 8 E68 MSI MC4 8 E68 MSI MC4 8 E68 MSI MC4 8 E68 MSI MC4 8 E68 MSI MC4 8 E68 MSI MC4 8 E68 MSI MC4 8 E68 MSI MC4 8 E68 MSI MC4 8 E68 MSI MC4 8 E68 MSI MC4 88 E6 SI M C4 M 88 E6 SI M C4 M USB3.
Graphics Card Installation http://youtu.
3 4 Chapter 2 5 Quick Installation 2-14
Chapter 3 BIOS Setup CLICK BIOS is a revolutionary UEFI interface that allows you to setup and configure your system for optimum use. Using your mouse and keyboard, users can change BIOS settings, monitor CPU temperature, select the boot device priority and view system information such as the CPU name, DRAM capacity, the OS version and the BIOS version. Users can import and export parameter data for backup or for sharing with friends.
Entering Setup The default settings offer the optimal performance for system stability in normal conditions. You may need to run the Setup program when: ■■ An error message appears on the screen during the system booting up, and requests you to run SETUP. ■■ You want to change the default settings for customized features. Important • Please clear the CMOS data and restore the default settings if the system becomes unbootable after changing BIOS settings.
Overview After entering BIOS, the following screen is displayed. Temperature monitor My Favorites Language System information Boot device priority bar Virtual OC Genie Button BIOS menu selection BIOS menu selection ▶▶BIOS menu selection The following options are available: ■■ SETTINGS - Uses this menu to specify the parameters for chipset and boot devices. ■■ OC - This menu contains the frequency and voltage adjustments.
▶▶Virtual OC Genie Button Enables or disables the OC Genie function by clicking on this button. When enabled, this button will be light. Enabling OC Genie function can automatically overclock with MSI optimized overclocking profile. Important We recommend that you do not to make any modification in OC menu mode and do not to load defaults after enabling the OC Genie function. ▶▶Menu display This area provides BIOS setting items and information to be configured.
Adding BIOS item to Favorite 1~5 1. Move the mouse cursor to highlight a BIOS setting item. 2. Right-click (or press "F2" key) and then choose a favorite menu (Favorite 1~5) to add the BIOS item. Choose a favorite menu to add the BIOS item Deleting BIOS item from Favorite 1~5 1. Move the mouse cursor to highlight a BIOS item in the Favorite 1~5 menu. 2. Right-click (or press "F2" key) and then click "Delete" to delete the BIOS item.
Operation You can control BIOS settings with the mouse and the keyboard. The following table lists and describes the hot keys and the mouse operations. Hot key Mouse <↑↓→← > Description Select Item .
Updating BIOS Updating the BIOS with M-FLASH ▶▶Before updating Please download the latest BIOS file that matches your motherboard model from MSI website. And then save the BIOS file into the USB flash disk. Important Only the FAT32/ NTFS format USB flash disk supports updating BIOS by M-FLASH. ▶▶Updating BIOS 1. Insert the USB flash disk that contains the BIOS update file into the computer. 2. Restart the system, and then press "Del" key to enter the BIOS Setup during POST. 3.
SETTINGS System Status ▶▶System Date Sets the system date. Use tab key to switch between date elements. The format is . Day of the week, from Sun to Sat, determined by BIOS. Read-only. The month from Jan. through Dec. The date from 1 to 31 can be keyed by numeric function keys. The year can be adjusted by users. ▶▶System Time Sets the system time. Use tab key to switch between time elements. The time format is .
▶▶PEGx - PCI_Ex - Gen x [Auto] Sets PCI Express protocol for matching different installed devices. [Auto] Enables all PCIe Gen1, Gen2 and Gen3. supports. [Gen1] Enables PCIe Gen1 support only. [Gen2] Enables PCIe Gen2 support only. [Gen3] Enables PCIe Gen3 support only. ▶▶PCI Latency Timer [32] Sets latency timer of PCI interface device. [Options: 32, 64, 96, 128, 160, 192, 224, 248 PCI Bus clocks] ▶▶ACPI Settings Sets ACPI parameters of onboard power LED behaviors. Press to enter the sub-menu.
▶▶sSATA Mode [AHCI Mode] (For SATA7~10) Sets the operation mode of the onboard 2nd SATA controller. [IDE Mode] Specify the IDE mode for SATA storage devices. [AHCI Mode] Specify the AHCI mode for SATA storage devices. AHCI (Advanced Host Controller Interface) offers some advanced features to enhance the speed and performance of SATA storage device, such as Native Command Queuing (NCQ) and hot-plugging. ▶▶SATAx Hot Plug [Disabled] Allows user to enable or disable the SATA hot plug support.
▶▶Power Management Setup Sets system Power Management of EuP2013 and AC Power Loss behaviors. Press to enter the sub-menu. ▶▶EuP 2013 [Disabled] Enables or disables the system power consumption according to EuP 2013 regulation. [Enabled] Optimize the system power consumption according to EuP 2013 regulation. [Disabled] Disables this function. Note: When enabled, the system will not support S4 & S5 wake up by USB, PCI and PCIe devices.
▶▶Secure Boot Sets the Windows secure boot to prevent the unauthorized accessing. Press to enter the sub-menu. This sub-menu will appear when “Windows 8/ 8.1 Feature” is enabled. ▶▶Secure Boot Support [Disabled] Enables or disables secure boot support. [Enabled] Enables the secure boot function and allow you to set the secure boot settings. [Disabled] Disables this function. ▶▶Secure Boot Mode [Standard] Selects the secure boot mode. This item is to select how the secure boot keys be loaded.
▶▶Resume By USB Device [Disabled] Disables or enables the system wake up by USB devices. [Enabled] Enables the system to be awakened from sleep state when activity of USB device is detected. [Disabled] Disables this function. ▶▶Resume From S3/S4/S5 by PS/2 Mouse [Disabled] Disables or enables the system wake up by PS/2 mouse. [Enabled] Enables the system to be awakened from S3/ S4/ S5 state when activity of PS/2 mouse is detected. [Disabled] Disables this function.
Security ▶▶Administrator Password Sets administrator password for system security. Enters the administrator password if set; user has full rights to change the BIOS items. ▶▶User Password Sets User Password for system security. Enters the user password if set; but user might have limited rights to change the BIOS items. Important When selecting the Administrator / User Password items, a password box will appear on the screen. Type the password then press .
Save & Exit ▶▶Discard Changes and Exit Exit BIOS setup without saving any change. This it is used to abandon all changes and exit BIOS setup. ▶▶Save Changes and Reboot This item is used to save all changes and reboot the system. ▶▶Save Changes This item is used to save current changes. ▶▶Discard Changes This item is used to discard current all changes and restore to the previous values. Restore Defaults This item is used to restore/ load all default values by the BIOS vendor.
OC Important • Overclocking your PC manually is only recommended for advanced users. • Overclocking is not guaranteed, and if done improperly, can void your warranty or severely damage your hardware. • If you are unfamiliar with overclocking, we advise you to use OC Genie for easy overclocking. ▶▶Simple/Advanced Mode [Simple] Enables or disables the advanced OC settings in BIOS. [Simple] Provides the regular OC settings in BIOS setup.
▶▶Adjusted CPU Frequency Shows the adjusted CPU frequency. Read-only. ▶▶CPU Ratio Mode [Dynamic Mode]* Selects the CPU Ratio operating mode. This item will appear when you set the CPU ratio manually. [Fixed Mode] Fixes the CPU ratio. [Dynamic Mode] CPU ratio will be changed dynamically according to the CPU loading. ▶▶EIST [Enabled]* Enables or disables the Enhanced Intel® SpeedStep Technology. [Enabled] Enables the EIST to adjust CPU voltage and core frequency dynamically.
▶▶CPU Base Clock Apply Mode [Auto]* Sets the applying mode for adjusted CPU base clock. [Auto] This setting will be configured automatically by BIOS. [Next Boot] CPU will run the adjusted CPU base clock at next boot. [Immediate] CPU runs the adjusted CPU base clock immediately. [During Boot] CPU will run the adjusted CPU base clock during boot. < DRAM Setting > ▶▶DRAM Reference Clock [Auto]* Sets the DRAM reference clock. The valid value range depends on the installed CPU.
▶▶Memory Fast Boot [Auto] Enables or disables the initiation and training for memory every booting. [Auto] This setting will be configured automatically by BIOS. [Enabled] Memory will completely imitate the archive of first initiation and first training. After that, the memory will not be initialed and trained when booting to accelerate the system booting time. [Disabled] The memory will be initialed and trained every booting. < Voltage Setting > ▶▶DigitALL Power Press to enter the sub-menu.
▶▶CPU VRM Over Temperature Protection [Enabled] Enables or disables the CPU VRM over-temperature protection. [Enabled] Sets the temperature limit on CPU VRM for over-temperature protection. The CPU frequency may be throttled when CPU temperature over the specified temperature. [Disabled] Disables this function. ▶▶DRAM CH_A/B, CH_C/D Phase Control [Auto] Controls PWM phase proportionally to the DRAM loading. If set to "Auto", BIOS will optimize the DRAM PWM phase automatically.
▶▶CPU Core/Ring Voltage Mode [Auto]* Selects the control mode for CPU Core/ Ring voltages. [Auto] This setting will be configured automatically by BIOS. [Adaptive Mode] Sets the adaptive voltage automatically for optimizing the system performance. [Override Mode] Allows you to set the voltage manually. [Offset Mode] Allows you to set the offset voltage and select the voltage offset mode. [Adaptive + Offset ] Sets the adaptive voltage automatically and allows you to set the offset voltage.
▶▶XXX Voltage [Auto]* (optional) Sets the voltages related to memory/ PCH. If set to "Auto", BIOS will set the voltage automatically or you can set it manually. < Other Setting > ▶▶CPU Memory Changed Detect [Enabled]* Enables or disables the system to issue a warning message during boot when the CPU or memory has been replaced. [Enabled] The system will issue a warning message during boot and than needs to load the default settings for new devices.
▶▶Execute Disable Bit [Enabled] Intel’s Execute Disable Bit functionality can prevent certain classes of malicious “buffer overflow” attacks where worms attempt to execute code to damage the system. It is recommended that keeps this item enabled always. [Enabled] Enables NO-Execution protection to prevent the malicious attacks and worms. [Disabled] Disables this function. ▶▶Intel Virtualization Tech [Enabled] Enables or disables Intel Virtualization technology.
▶▶Intel C-State [Enabled] C-state is a processor power management technology defined by ACPI. [Auto] This setting will be configured automatically by BIOS. [Enabled] Detects the idle state of system and reduce CPU power consumption accordingly. [Disabled] Disable this function. ▶▶C1E Support [Disabled] Enables or disables the C1E function for power-saving in halt state. This item appears when "Intel C-State" is enabled.
▶▶Internal VR OVP OCP Protection [Auto] Enables or disables the over-voltage protection and over-current protection for CPU internal VR (Voltage Regulator). [Auto] This setting will be configured automatically by BIOS. [Enabled] Enables the limitation of internal VR for over-voltage protection and over-current protection. [Disabled] Disables this function for overclocking. ▶▶Internal VR Efficiency Management [Auto] Enables or disables the CPU internal VR efficiency management.
M-FLASH Important M-Flash funcion allows you to update BIOS from USB flash disk (FAT32/ NTFS format only). ▶▶Select one file to update BIOS and ME Selects a BIOS file, includes the ME management settings, in the USB flash disk (NTFS/ FAT32 format) to update the BIOS and ME. The system will reboot after updating.
OC PROFILE ▶▶Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6 Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6 management. Press to enter the submenu. ▶▶Set Name for Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6 Names the current overclocking profile. ▶▶Save Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6 Saves the current overclocking profile. ▶▶Load Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6 Loads the current overclocking profile. ▶▶Clear Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6 Clears the current overclocking profile.
HARDWARE MONITOR Current Temperature & Speed information Fan control field Setting Buttons Voltage display ▶▶Current Temperature & Speed information Shows the current CPU temperature, system temperature and fans' speeds. Chapter 3 ▶▶Fan control field This motherboard provides a fan speed control feature call “Smart Fan Mode”. Please check the “Smart Fan Mode” to enable the Smart Fan Mode.
Appendix A Realtek Audio The Realtek audio provides 10-channel DAC that simultaneously supports 7.1 sound playback and 2 channels of independent stereo sound output (multiple streaming) through the Front-Out-Left and Front-Out-Right channels.
Software Configuration Appendix A After installing the audio driver (see Chapter 1 - Driver and Utilities), the “Realtek HD Audio Manager” icon will appear at the notification area (lower right of the screen). You may double click the icon and the GUI will pop up accordingly. double click the icon It is also available to enable the audio driver by clicking the Realtek HD Audio Manager from the Control Panel.
▶▶Volume Adjustment You can control the volume or balance the right/left side of the speakers that you plugged in front or rear panel by adjust the bar. ▶▶Application Enhancement The array of options will provide you a complete guidance of anticipated sound effect for both output and input device. ▶▶Jack status panel This panel depicts all render and capture devices currently connected with your computer.
Appendix B Intel RAID This appendix will assist users in configuring and enabling RAID functionality and accelerating system on platforms
Introduction The motherboard comes with the Intel RAID controller that allows you to configure SATA hard drives as RAID sets. SATA hard drives deliver blistering transfer speeds up to 6 Gb/s. Serial ATA uses long, thin cables, making it easier to connect your drive and improving the airflow inside your PC. The most outstanding features are: 1. Supports 3 Gb/s or 6 Gb/s transfers with CRC error checking. 2. Supports Hot-plug-n-play feature. 3.
Using Intel Rapid Storage Technology Option ROM Creating, Deleting and Resetting RAID Volumes: The Serial ATA RAID volume may be configured using the RAID Configuration utility stored within the Intel RAID Option ROM. During the Power-On Self Test (POST), the following message will appear for a few seconds. Important The “Device Model”, “Serial #” and “Size” in the following example might be different from your system. RAID Volumes None defined.
After pressing the and keys simultaneously, the following window will appear: [ [ MAIN MAIN MENU ] ] 1. 2. 3. 4. Recovery Volume Options Create RAID Volume 5. Acceleration Options Delete RAID Volume 6. Exit Reset Disks to Non-RAID [ DISK / VOLUME INFORMATION ] RAID Volumes : None defined. Appendix B Physical Devices : Port Device Model 1 XXXX-XXXXXXXX 2 XXXX-XXXXXXXX [ ↑↓] - Select Serial # XXXXXXXXXXXXXX XXXXXXXXXXXXXX [ESC] - Exit Size Type/Status (Vol ID) XXX.XGB Non-RAID Disk XXX.
3. In the Disk field, press key and use key to select the disks you want to create for the RAID volume, then click key to finish selection. This field will become available according to the selected RAID level. 4. Then select the strip size for the RAID array by using the “upper arrow” or “down arrow” keys to scroll through the available values, and pressing the key to select and advance to the next field.
6. Go to the Create Volume field and press , the following screen appears for you to confirm if you are sure to create the RAID volume. Press to continue. [ CREATE VOLUME MENU ] Volume0 RAID1(Mirror) Select Disks N/A XXX.X GB N/A Create Volume WARNING : ALL DATA ON SELECTED DISKS WILL BE LOST. HELP [ Are you sure you want to create] this volume? (Y / N) : Name : RAID Level : Disks : Strip Size : Capacity : Sync : Appendix B Press ENTER to create the specified volume.
■■ Delete RAID Volume Here you can delete the RAID volume, but please be noted that all data on RAID drives will be lost. Important Select option 2 Delete RAID Volume from the main menu screen and press key to select a RAID volume for deletion. Then press key to delete the selected RAID volume. The following screen appears. [ DELETE VOLUME MENU ] Name Volume0 Level RAID1(Mirror) Drives 2 Capacity XXX.
■■ Reset Disks to Non-RAID Select option 3 Reset Disks to Non-RAID and press to delete the RAID volume and remove any RAID structures from the drives. The following screen appears: [ MAIN MENU ] 4. Recovery Volume Options Create RAID Volume 4. ] Recovery Volume Options Delete RAID Volume [ RESET RAID DATA 5. remove Exit its RAID structures Resetting RAID disk will VOLUME INFORMATION and revert [ it DISK to a / non-RAID disk. ] 1. 2.
■■ Recovery Volume Options Select option 4 Recovery Volume Options and press to change recovery volume mode. The following screen appears: [ RECOVERY VOLUME OPTIONS ] 1. 2. Enable Only Recovery Disk Enable Only Master Disk [ HELP ] [ ↑↓] - select [ESC] - Previous Menu Appendix B Enable Only Recovery Disk - enables recovery disk if available and disables master disk. Enable Only Master Disk - enables master disk if available and disables recovery disk.
Degraded RAID Array A RAID 1, RAID 5 or RAID 10 volume is reported as degraded when one of its hard drive members fails or is temporarily disconnected, and data mirroring is lost. As a result, the system can only utilize the remaining functional hard drive member. To re-establish data mirroring and restore data redundancy, refer to the procedure below that corresponds to the current situation. Missing Hard Drive Member 1. Make sure the system is powered off. 2. Reconnect the hard drive. 3.
5. Exit Intel RAID Option ROM, and then reboot to Windows system. 6. When prompted to rebuild the RAID volume, click ‘Yes’. Appendix B 7. The Intel Rapid Storage Technology application will be launched. Right-click the new hard drive and select ‘Rebuild to this Disk’. The ‘Rebuild Wizard’ will be launched which will guide you through the process of rebuilding to the new hard drive.
System Acceleration (optional) Intel® Rapid Storage Technology use a SSD as a cache. Which can store frequently used data without having to use a slow virtual disk or depend on RAM. The SSD cache with the advantages of high-speed read/write and non-volatile memory to accelerate the system performance. Important Check your SSD manufacturer's website, upgrade firmware in order to support Intel® Rapid Storage Technology. Appendix B Intel® Rapid Storage Technology can only work with RAID mode.
9. Run Intel Rapid Storage Technology application. 10. Click "Enable acceleration" under Performance tab. Click here Appendix B 11. Select the acceleration mode options. 12. Click OK and reboot the system. The page refreshes and reports the new acceleration configuration in the Acceleration View. Important You can click “More help on this page” or "More help" of the Intel® Rapid Storage Technology application to view more information.
RST Synchronization (optional) If you are using Maximized mode as the Acceleration mode, the data on the hard disk is not always synchronized with the data in the SSD cache. In some situations, you may want to manually sync the disks for avoiding data loss. Follow these steps to sync manually. 1. Reboot system, during the Power-On Self Test (POST) press, press and keys simultaneously to enter the Intel Rapid Storage Technology Option ROM. 2.
