User`s manual

Chapter 1
1-10
Getting Started
Back Panel Quick Guide
PS/2 Port
A PS/2
®
DIN connector is for a PS/2
®
mouse/keyboard.
Clear CMOS Button
There is CMOS RAM present on board that is powered by an external battery to store

the operating system (OS) every time it is turned on. If you wish to clear the system

USB 2.0 Port
The USB 2.0 port is for attaching USB 2.0 devices such as keyboard, mouse, or other
USB 2.0-compatible devices.


rate up to 5 Gbit/s (SuperSpeed).


transfer rate up to 10 Gb/s (SuperSpeed USB 10 Gbps).
Important


LAN Port
The standard RJ-45 LAN jack is for connecting to a Local Area Network (LAN).
LINK/ACT
LED
SPEED
LED
LED LED Status Description
Link/ Activity LED
 No link
Yellow Linked
Blinking Data activity
Speed LED
 10 Mbps connection
Green 100 Mbps connection
Orange 1 Gbps connection
   
Clear CMOS
Button
LAN Port
PS/2 Port
USB 2.0 Port
Optical
S/PDIF-Out
Line-In/ SS-Out
Line-OutRS-Out
CS-Out
MIC