User`s manual

Chapter 1

Getting Started
Jumpers
JBAT1: Clear CMOS Jumper
There is CMOS RAM onboard that is external powered from a battery located on the

automatically boot into the operating system (OS) every time it is turned on. If you

Keep Data Clear Data
1 1
Important

Afterwards, open the jumper. Do not clear the CMOS RAM while the system is on
because it will damage the motherboard.
JSLOW1: Slow Mode Booting Jumper
This jumper is used for LN2 cooling solution, that provides the extreme overclocking
conditions, to boot at a stable processor frequency and to prevent the system from
crashing.
EnabledNormal
(Default)
(Please enable this
jumper during BIOS
POST.)
Important
 Users will try extreme low temperature overclocking at their own risks. The
overclocking results will vary according to the CPU version.
 
bootable.